Configure Logbook; Configure Security - ABB AV410 User Manual

5.7 Configure Logbook

-----
CONFIG. LOGBOOK
Off
----- On
Logbook

5.8 Configure Security

-----
CONFIG. SECURITY
00000
Alter Sec. Code
00000
Alter Cal. Code
Alter Sec. Code
Configure Logbook
Set the logbook to or
On Off
If is selected, all data entries in the logbook are cleared.
Off
Return to main menu.
CONFIG. LOGBOOK
Option board fitted and Serial Communications feature enabled (Section 7.1)
CONFIG. SERIAL
– see Supplementary Manual PROFIBUS Datalink Description (IM/PROBUS).
Option board not fitted or option board fitted but Serial Communications
CONFIG. SECURITY
feature not enabled (Section 7.1) – see Section 5.8.
Alter Security Code
Set the security code to a value between 0000 and 19999.
Alter Calibration Code
Set the sensor calibration access code to a value between 0000 and 19999.
Return to main menu.
CONFIG. SECURITY
See Section 5.9.
TEST/MAINTENANCE
.
5 PROGRAMMING...
27