Table of Contents
Advertisement
...3 OPERATOR VIEWS
3.2 View Outputs
-----
VIEW OUTPUTS
20. 4 0
mA
102. 0
%
Analog Output 1
3.3 View Hardware
-----
VIEW HARDWARE
UV
7320
100
Sensor Type A
UV
7320
100
Sensor Type B
-----
Pb DP
Digital Comms.
VIEW HARDWARE
10
Theoretical Analog Output
There are two analog outputs that are assigned automatically depending on monitor
configuration. On a single input monitor, both are assigned to Sensor A. On a dual input
monitor, Output 1 is assigned to Sensor A and Output 2 is assigned to Sensor B.
Live current output value being retransmitted.
Current output shown as a percentage of full scale for the output range set in
– see Section 5.5.
OUTPUTS
See Section 3.3.
VIEW HARDWARE
See Section 4.2.
SENSOR CAL
Advance to analog output 2.
Analog Output 2
Sensor Type A
Displays the sensor type selected for the Sensor A input in the
Section 7.1.
7320
100
– Low Range (0 to 20mgl
7320
– High Range (0 to 100mgl
200
Sensor Type B – Dual input monitors only
Displays the sensor type selected for the Sensor B input in the
Section 7.1.
Digital Communications Option Board
Note. Displayed only if the digital communications option board is fitted.
Displays the communications type enabled in the
See Section 3.4.
VIEW SOFTWARE
See Section 4.2.
SENSOR CAL
Factory Settings
-1
C)
-1
C)
Factory Settings
page – see Section 7.1.
Factory Settings
CONFIG.
page – see
page – see
Advertisement
Table of Contents
