Led Indicator Light Description - Craftsman G10-0R7G-2SB Manual

Keys Name
Program
Enter Key
Increase
key
Decrease
key
Shift Key
Run Key
STOP /
RESET
Shortcut

4.2.2 LED Indicator light description

Have 5 digit LED ,3 units indicator lights, and 4 status indicator lights ,which can display
all kinds of monitoring data and alarm codes such as reference frequency, output
frequency and so on,as show in Fig.4-1.The 3 units indicator lights combination can
display 5 unit instructions,function and unit indicator light description as show in Table 4-
2.
Table 4-1 Functions of keys
Entry or escape of first-level menu.
Key
Progressively enter menu and confirm parameters.
Progressively increase data or Codes.
Progressively decrease data or Codes.
While modifying parameters, it is used to select the data
bits. In stop and operate mode, it is used to cyclically
display parameters
Start to run the inverter in keypad
control mode.
In running status,it can be used
to stop the inverter.
When fault alarm, it can be used
Key
to reset the inverter.
This button is restricted by F7.04.
Determined by Code F7.03:
0: Jog operation
Key
1: Switch between forward and reverse
2: Clear the UP/DOWN settings.
Description
22
Pressing the RUN
and STOP/REST at
the same time can
achieve inverter free
stop.