ABB AccessControl System Manual page 54

Table of Contents

8. Coupling the reading head in building structure of the "Smart Access Point Pro" with the

"Smart Access Point Pro", "RF/IP Gateway" or a "RF Repeater".

–

To couple the reading head, change into the management software of the "Smart

Access Point Pro.

–

For the necessary steps in the management software, see chapter 5.4.4 "Coupling the

"Electronic cylindrical lock" with the "Smart Access Point Pro"" on page 122.

–

If the "Smart Access Point Pro", "RF/IP Gateway" or "RF Repeater" is not yet

placed, carry this out first, see chapter 5.2 "Building structure" on page 95 and see

chapter 5.4 "Access control" on page 113.

If the "Electronic cylindrical lock" is logged, placed and coupled into the management software

of the "Smart Access Point Pro", locking rights for the lock can be created for persons.

–

To assign locking rights, change into the management software of the "Smart Access Point

Pro.

–

For the necessary steps in the management software, see chapter 5.5 "User management"

on page 131.

System Manual 2CKA001473B5074

Commissioning

│54

Table of Contents