ABB AccessControl System Manual page 110

Fig. 98: "RF/IP Gateway" characteristics
– All "RF/IP Gateway" found are displayed in the list view.
3. Enter the name of the "RF/IP Gateway" in field [1].
4. Enter the serial number [2] of the "RF/IP Gateway".
5. Assign the "RF/IP Gateway" to the building structure [3] (building, floor, room).
– The assignment to the building structure can also be made later, see chapter 5.2
"Building structure" on page 95.
6. Click on the "Save" button [4].
The "RF/IP Gateway" has been created.
System Manual 2CKA001473B5074
Management software in the "Smart Access Point Pro"
│110