Leveling Leg - Electrolux EID200QSW00 Technical & Service Manual

Steps to assemble the Belt:
1. Pull the Front Bulkhead towards yourself while
simultaneously lifting the Drum to insert Belt from the
gap between the Front Bulkhead and the Drum (See
Fig. 131).
2. Tighten the 12 screws that hold the Front Bulkhead
with the unit (See Fig. 127).
3. Rotate the Belt in the clockwise direction and
slightly push it inside the shaft (See Fig. 132).
4. Reassemble the Front Panel (Refer 4
Door Lamp Assemble Procedure).
5. Reassemble the Right Side Panel (Refer 5-8 steps
of Main Control Board Assemble Procedure).
6. Reassemble the Left Side Panel (Refer 6-8 steps
of Heating Element Assemble Procedure).
7. Reassemble the Top Panel (Refer last 4 steps of
Control Panel Assemble Procedure).
Serviceable Component Accessibility
Fig. 131
Fig. 132
step of
th

9.16. Leveling Leg

Steps to disassemble the Leveling Leg:
1. Carefully incline the unit using a strong thermacol
or wooden piece (See Fig. 133).
2. Rotate Leveling Legs clockwise and take it out
using hand from the unit (See Fig. 134).
Fig. 135: Leveling Leg
Steps to replace the Leveling Leg:
1. Carefully incline the unit using a strong thermocol
or wooden piece (See Fig. 133).
2. Rotate Leveling Legs anti-clockwise and insert
using hand (See Fig. 136).
39
Fig. 133
Fig. 134
Fig. 136