Motor And Fan Wheels - Electrolux EID200QSW00 Technical & Service Manual

Serviceable Component Accessibility
3. Take out the Fan Wheel Back Cover (See Fig. 61)
and Fan Wheel Front Cover (See Fig. 62) to take out
the Motor Assembly (See Fig. 63).
Fig. 64: Motor Assembly
Fig. 61
Fig. 62
Fig. 63
Step: 3
From the Motor Assembly, we can access the
following components (See Fig. 65):
1. Motor
2. Fan Wheels

9.6.1 Motor and Fan Wheels

Steps to disassemble the Motor and Fan:
Remove the 2 nuts (See Fig. 65) to take out the Motor
and Fan Wheels separately.
2
Fig. 66: Motor
Steps to assemble the Motor Assembly:
1. Tighten the 2 nuts to hold Motor and Fan Wheels
together (See Fig. 65).
2. Align the Motor Assembly and mount Fan Wheel
Rear Cover and Fan Wheel Front Cover in their
respective places (See Fig. 61 and Fig. 62).
3. Tighten the 3 screws that hold the Motor Assembly
(See Fig. 59).
4. Plug the connector and tighten the spring (See
Fig. 60).
5. Reassemble the Right Side Panel (Refer 5-8 steps
of Main Control Board Assemble Procedure).
26
2
1
Fig. 65
Fig. 67: Fan Wheels