Anti-Interfer Filter; Drum Vanes - Electrolux EID200QSW00 Technical & Service Manual

Serviceable Component Accessibility

9.2 Anti-Interfer Filter

Steps to disassemble the Anti-Interfer Filter:
1. For disassembling the Anti-Interfer Filter, remove
the Top Panel (Refer first 4 steps of Control Panel
Disassemble Procedure).
2. In order to take out the Anti-Interfer Filter, take out
the Terminal Block (See Fig. 26).
3. Remove the 3 screws to take out the Terminal
Block Box (See Fig. 25).
Fig. 25
4. Remove the screw and then the nut inside the
Terminal Block Box Cover (See Fig. 27).
5. Unplug the connector and the terminal to take out
the Anti Interfer Filter (See Fig. 28 and Fig. 29).
Fig. 26
Fig. 27
Fig. 28
Fig . 30: Anti-Interfer Filter
Steps to assemble the Anti-Interfer Filter:
1. Insert Anti Interfer Filter in its position and plug
the connector and the connector terminal (See Fig. 28
and Fig. 29).
2. Tighten the nut and then screw in this order inside
the Terminal Block Box Cover (See Fig. 27).
3. Tighten the 3 screws that hold the terminal block
box (See Fig. 25).
4. Reassemble the Top Panel (Refer last 4 steps of
Control Panel Assemble Procedure).

9.3 Drum Vanes

Steps to disassemble the Drum Vanes:
1. For disassembling the Drum Vanes, remove
the Top Panel (Refer first 4 steps of Control Panel
Disassemble Procedure).
20
Fig. 29