Yamaha AVENTAGE RX-A1080BL Owner's Manual page 55

MAIN MAIN ZONE 2 ZONE 2
SLEEP SLEEP
PARTY T T PARTY PURE DIRECT PURE DIRECT HDMI OUT HDMI OUT
SCENE SCENE
1 1 2 2 3 3 4 4
5 5 6 6 7 7 8 8
INPUT INPUT
TUNER TUNER NET NET USB USB BLUETOOTH BLUETOOTH
PRESET PRESET
RED RED GREEN GREEN YELLOW YELLOW BLUE BLUE
SETUP
Cursor keys
ENTER
TOP TOP POP-UP POP-UP
HOME HOME
MENU MENU /MENU / / MENU
AI AI
SUR. DECODE SUR. DECODE
PROGRAM PROGRAM VOLUME VOLUME
ENHANCER ENHANCER
STRAIGHT STRAIGHT
MEMORY MEMORY
TUNING TUNING BAND BAND TUNING TUNING
Searching for an access point
If you select "Access Point Scan" as the connection method, the unit
starts searching for access points. After a while, the list of available
access points appears on the TV screen.
1
Use the cursor keys and ENTER to check the desired
access point and select "NEXT".
The wireless connection setting screen appears on the TV.
2
Use the cursor keys and ENTER to enter the security key
and select "NEXT".
3
Use the cursor keys to select "CONNECT" and press
ENTER to start the connection process.
When the connection process finishes, "Completed" appears on
the TV screen.
If "Not connected" appears, repeat from Step 1 or try another
connection method.
4
To exit from the menu, press SETUP.
Setting up the wireless connection manually
If you select "Manual Setting" as the connection method, the wireless
connection setting screen appears on the TV.
You need to setup the SSID (network name), encryption method and
security key for your network.
1
Use the cursor keys and ENTER to enter the SSID of the
access point and select "NEXT".
2
Use the cursor keys and ENTER to check the security
method of the access point and select "NEXT".
Settings
None, WEP, WPA2-PSK (AES), Mixed Mode
55
En