Yamaha AVENTAGE RX-A1080BL Owner's Manual page 115

Front Presence
Selects whether or not front presence speakers are connected and their size and layout.
Settings
Large Select this option for large speakers.
Small Select this option for small speakers.
None Select this option when no front presence speakers are connected.
Layout Settings
Select this option when front presence speakers are installed on the front side
Front Height
wall.
Overhead Select this option when front presence speakers are installed to the ceiling.
Select this option when using the Dolby Enabled speakers as the front presence
Dolby Enabled SP
speakers.
X
• This setting is not available when "Configuration (Front Presence)" is set to "None".
• To play Dolby Atmos contents using the front presence speakers, see "Presence speaker layout" (p.22).
Subwoofer
Selects whether or not a subwoofer is connected and its phase.
Settings
Use Select this option when a subwoofer is connected.
None Select this option when no subwoofer is connected.
Phase Settings
Normal Does not reverse the subwoofer phase.
Reverse Reverse the subwoofer phase.
X
When the bass sound is lacking or unclear, switch the subwoofer phase.
■ Distance
Sets the distance between each speaker and listening position so that sounds from the
speakers reach the listening position at the same time. First, select the unit of distance from
"Meter" or "Feet".
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front
Presence R, Subwoofer
Setting range
0.30 m to 3.00 m to 24.00 m (1.0 ft to 10.0 ft to 80.0 ft), *0.05 m (0.2 ft) increments
■ Level
Adjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front
Presence R, Subwoofer
Setting range
-10.0 dB to 0.0 dB to +10.0 dB (0.5 dB increments)
■ Parametric EQ
Adjusts the tone with an equalizer.
Settings
Select this option when you want to adjust the equalizer manually.
Manual
For details, see "Manual equalizer adjustment".
YPAO:Flat Adjusts individual speakers to achieve the same characteristics.
Adjusts individual speakers to achieve the same characteristics as the front
YPAO:Front
speakers.
YPAO:Natural Adjusts all speakers to achieve a natural sound.
Through Does not use the equalizer.
X
"YPAO:Flat", "YPAO:Front", and "YPAO:Natural" are available only when the measurement results of "YPAO"
have already been saved (p.43). Press ENTER again to view the measurement results.
115
En