Yamaha AVENTAGE RX-A1080BL Owner's Manual page 125

ARC
Enables/disables ARC (p.164) when "HDMI Control" is set to "On".
Settings
Off Disables ARC.
On Enables ARC.
Y
You do not need to change this setting normally. In case noises are produced from the speakers connected to the
unit because TV audio signals input to the unit via ARC are not supported by the unit, set "ARC" to "Off" and use
the TV's speakers.
Standby Sync
Select whether to use HDMI control to link the standby behavior of the TV and the unit when
"HDMI Control" is set to "On".
Settings
Off Does not set the unit to standby mode when the TV is turned off.
On Sets the unit to standby mode when the TV is turned off.
Sets the unit to standby mode when the TV is turned off only when the unit is
Auto
receiving TV audio or HDMI signals.
■ HDMI Audio Output
Selects whether the HDMI sound is output from the TV speakers.
X
The "HDMI OUT1" setting is available only when "HDMI Control" is set to "Off".
HDMI OUT1, HDMI OUT2, HDMI ZONE OUT
Enables/disables the audio output from a TV connected to the HDMI OUT 1 jack, HDMI OUT 2
jack or HDMI ZONE OUT.
Settings
Off Disables the audio output from the TV.
On Enables the audio output from the TV.
Y
The HDMI OUT 1-2 jacks output 2-channel audio signals when the unit is turned on.
■ HDCP Version
Selects the HDCP version of the HDMI input jacks for watching 4K video content.
Input sources
AV 1-7
Settings
Auto Automatically sets the version of HDCP according to content.
1.4 Sets the version of HDCP to always be 1.4.
■ HDMI Standby Through
Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in
stand by mode. If this function is set to "On" or "Auto", you can use the input selection keys to
select an HDMI input even when the unit is in standby mode (the standby indicator on the unit
blinks).
Settings
(This setting is available only when "HDMI Control" is set to "Off".)
Off
Does not output videos/audio to the TV.
Outputs videos/audio to the TV.
On
(The unit consumes more power than when "Off" is selected.)
Outputs videos/audio to the TV. If no signals are detected, the unit is set to the
Auto
power saving mode.
125
En