Yamaha AVENTAGE RX-A1080BL Owner's Manual page 133

■ Input Skip
Set which input sources are skipped when operating the INPUT key or AV CONTROLLER. You
can select the desired input source quickly by using this function.
X
When using AV CONTROLLER, you cannot select the input sources set to "On" in this function.
Input sources
AV 1-7, AUX, AUDIO 1-3, PHONO, TUNER, (network sources), Bluetooth, USB
Settings
Off Does not skip the selected input source.
On Skips the selected input source.
■ Input Rename (Auto)
Automatically changes the input source names displayed on the front display.You can select a
name created by the Auto Rename function.
Input sources
AV 1-7, AUDIO 1-3
■ Procedure
1
Use the cursor keys to select an input source to be renamed.
2
Use the cursor keys to select "Auto".
3
To change another input source name, repeat steps 1 to 2.
4
Press SETUP.
X
• When "Auto" is selected, the created name is saved even after the external device is disconnected. To reset to
the default setting, switch the setting to "Manual" and then back to "Auto".
• "Auto" can be selected for AUDIO 1-3 only if a digital "Input Assignment" setting is selected.
■ Input Rename (Manual)
Allows the input source names displayed on the front display to be set manually.
Input sources
AV 1-7, AUX, AUDIO 1-3, PHONO, TUNER, MusicCast Link, SERVER, NET RADIO, Bluetooth, USB
■ Procedure
1
Use the cursor keys to select an input source to be renamed.
2
Press ENTER.
The cursor moves to the name edit screen.
3
Use the cursor keys and ENTER key to edit the name, and then select "SAVE" and press ENTER.
X
• To cancel the entry, select "CLEAR".
• If you select "RESET", the default input name will be inserted into the editing area.
4
To change another input source name, repeat steps 1 to 3.
5
Press SETUP.
■ Auto Play
Enables/disables Auto Play function in Internet streaming services and following input
sources.
Input sources
(network sources), SERVER, NET RADIO, Bluetooth, USB
Settings
Off Disables Auto Play function.
On Starts automatically to play back the last content which you played back.
Starts automatically to play back the content which only you played back at
Auto
setting the unit to standby mode.
Y
In some input sources or content, you might not enable Auto Play function.
X
With some input sources, "Auto" cannot be selected.
133
En