Page 1
AV Receiver Owner's Manual • This unit is a product for enjoying video and music at home. • This manual explains preparations and operations for everyday users of the unit. • Read the supplied booklet “Quick Start Guide” before using the unit.
CONTENTS BEFORE USING THE UNIT 3 Connecting playback devices............31 HDMI connection with a video device such as a BD/DVD player................. 31 How to use this manual................8 Connection other than HDMI with a playback device..................... 31 Connecting to the jack on the front panel........................33 How to use this manual.................................
Page 3
ENJOYING SOUND Listening to FM/AM radio (Except for U.K., Europe, Russia, Middle East and Australia models)..............65 Enjoying sound field effects..............50 Setting the frequency steps............................... 65 Selecting a frequency for reception..........................66 Select your favorite sound mode............................. 50 Selecting a preset station..............................67 Enjoying 3D sound fields (CINEMA DSP 3D)........................
Page 4
Playing back music stored on media servers (PCs/NAS)...... 85 Configuring the speaker settings............110 Media sharing setup on media servers (PCs/NAS)..................... 85 Setting your speaker system............................110 Playing back music stored on media servers (PCs/NAS)..................85 Setting the size of the front speakers.......................... 110 Listening to Internet radio..............
Page 5
Configuring the sound settings............117 Configuring the video/HDMI settings..........129 Checking the current audio signal information....................... 117 Checking the current video and HDMI signal information.................. 129 Enabling Lipsync adjustment............................117 Setting the use of the video signal processing......................129 Setting the adjustment method of the Lipsync function..................118 Setting a resolution to output HDMI video signals....................
Page 6
Configuring the multi zone settings........... 138 Configuring the advanced settings (ADVANCED SETUP menu)..151 Checking the Zone2 information..........................138 Basic operation of the ADVANCED SETUP menu..................... 151 Setting the use of volume adjustments for Zone2 output.................. 138 ADVANCED SETUP menu items............................. 151 Setting the Zone2 limit value of the volume......................
Page 7
Glossary....................185 Glossary of audio information............................185 Glossary of HDMI and video information........................186 Glossary of network information........................... 187 Glossary of Yamaha technologies..........................187 Supported devices and file formats............ 188 Supported Bluetooth® devices............................188 Supported USB devices..............................188 Supported AirPlay devices............................... 188 Supported file formats..............................
£ Quick Start Guide NOTE: Indicates instructions and supplementary explanations for optimum use. * The supplied power cable varies depending on the region of purchase. NOTE Access the Yamaha Downloads site to download the latest Owner's Manual and Quick Start Guide. http://download.yamaha.com/...
Using the remote control Insert the batteries in the remote control Insert the batteries the right way round. Operating range of the remote control Point the remote control at the remote control sensor on the unit and remain within the operating range shown in the following figure.
• “Playing back digitally compressed formats with volume balance and acoustic parameters, to suit your enriched sound (Compressed Music • “Playback Bluetooth ® device music on the room (YPAO: Yamaha Parametric room Acoustic Enhancer)” (p.54) unit” (p.81) Optimizer). • “Enjoying Dolby Atmos ®...
Page 11
Useful functions Application: "MusicCast Useful applications CONTROLLER" The unit is equipped with the various useful functions. Application: “AV SETUP GUIDE” The SCENE function allows you to select the input MusicCast CONTROLLER is an application that source and settings registered to the corresponding allows you to link a MusicCast compatible device scene, such as sound program and Compressed AV SETUP GUIDE is an application that assists...
Part names and functions Part names and functions of the front panel The part names and functions of the front panel are as follows. MAIN ZONE PURE DIRECT ZONE 2 ZONE CONTROL INFO (WPS) MEMORY PRESET TUNING VOLUME INPUT SCENE PHONES TONE CONTROL PROGRAM...
Page 13
INPUT knob Select an input source. PHONES jack For connecting headphones. USB jack For connecting a USB storage device (p.84). TONE CONTROL key Adjusts the level of high-frequency range (Treble) and low- frequency range (Bass) individually (p.96). PROGRAM keys Select a sound program or a surround decoder (p.50). STRAIGHT (CONNECT) key Enables/disables the straight decode mode (p.52).
Part names and functions of the front display The part names and functions of the front display are as follows. LINK MASTER STEREO TUNED ZONE SLEEP PARTY A - DRC ENHANCER YPAO VOL. VOL. MUTE VIRTUAL HDMI ZONE2 ENHANCER Lights up when HDMI signals are being input or output. Lights up when audio output to Zone2 (p.59) is enabled.
Part names and functions of the rear panel The part names and functions of the rear panel are as follows. TRIGGER OUT RS-232C 0.1A HDMI ( HDCP2.2 NETWORK HDMI OUT (4 NET RADIO) HDCP2.2 (8 SERVER) (1 MOVIE) (5 STB) (6 GAME) AC IN REMOTE...
Part names and functions of the remote control The part names and functions of the supplied remote control are as follows. Remote control signal transmitter ENTER/Cursor, RETURN keys Transmits infrared signals. Operates the menu. MAIN MAIN MAIN ZONE 2 ZONE 2 ZONE 2 z (receiver power) key HELP key...
PREPARATIONS Connecting speakers Names and functions of speakers Speaker type Abbr. Function Front (L/R) 1/2 Produce front channel sounds (stereo sounds). The names and functions of speakers connected to the unit are as follows. Produces center channel sounds (such as movie dialogue Center and vocals).
Speaker systems and speakers to be connected Speaker requirements Select the speaker layout for the number of speakers that you are using and place the Speakers and subwoofers to be connected to the unit must meet the following speakers and subwoofer in your room. requirements: •...
Setting the speaker impedance How to connect speakers Under its default settings, the unit is configured for 8-ohm speakers. When connecting Connecting the speaker 6-ohm speakers, set the speaker impedance to “6 Ω MIN”. Connect a speaker cable between the negative (–) terminal of the unit and the Before connecting speakers, connect the power cable to an AC negative (–) terminal of the speaker, and between the positive (+) terminal of the unit wall outlet.
Page 20
NOTE Connecting the subwoofer ▪ Remove the unit’s power cable from an AC wall outlet before connecting the speakers. Use an audio pin cable to connect the subwoofer. ▪ Be sure to connect the front left and right speakers. ▪ Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, NOTE set the unit’s speaker impedance to “6 Ω...
How to place speakers (speaker systems) Using 7.1/5.1.2-channel system This speaker system brings out the full performance of the unit and allows you to enjoy 0.5 to 1 m 0.5 to 1 m (1.6 to 3.3 ft) (1.6 to 3.3 ft) a highly-natural 3-dimensional sound field with any contents.
Page 22
For Overhead of the presence speakers layout Using 5.1.2-channel system To have a full effect of Dolby Atmos or DTS:X contents, we recommend this speaker system. The presence speakers produce a natural 3-dimensional sound field including overhead. NOTE ▪ When installing the presence speakers on the ceiling above the listening position, or when using Dolby Enabled speakers as the presence speakers, the presence speaker layout settings must be changed.
Page 23
Using 7.1-channel system This speaker system allows you to enjoy extended surround sound using the surround back speakers. NOTE You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. 10° to 30° 10° to 30° 0.3 m (1 ft) or more PRE OUT CENTER SUR.
Page 24
Using 5.1-channel system This is a basic speaker layout recommended for enjoying surround sound. NOTE You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. 10° to 30° 10° to 30° PRE OUT CENTER SUR. BACK SURROUND SPEAKERS SURROUND...
Page 25
Using 3.1.2-channel system We recommend this speaker layout when you cannot place speakers in the back of the room. You can also enjoy Dolby Atmos or DTS:X content with this speaker system. NOTE ▪ When installing the presence speakers to the ceiling above the listening position or using the Dolby 0.5 to 1 m 0.5 to 1 m (1.6 to 3.3 ft)
Page 26
Using Virtual CINEMA FRONT This speaker layout is recommended if you cannot place speakers in the back of the room. NOTE ▪ To use Virtual CINEMA FRONT, the speaker configuration settings must be changed. For details, see the following: – “Assigning speaker configuration” (p.41) –...
Advanced speaker systems 7.1 + 1Zone Available configurations for advanced speaker systems using the unit’s internal amplifier In addition to the basic speaker systems, the unit also allows you to apply the following speaker configurations to enhance your system. • Using the four internal amplifiers for front speakers to have more high-quality sounds (Bi-amp connection) •...
Page 28
5.1.2 + 1Zone 5.1 BI-Amp Bi-amp Zone2 Main zone Speaker Connect to Speaker Connect to FRONT FRONT and EXTRA SP2 (bi-amp connection) CENTER CENTER SURROUND SURROUND (not used) (not used) EXTRA SP1 (not used) SUBWOOFER 1-2 SUBWOOFER 1-2 Zone2 speakers EXTRA SP2 NOTE When Zone2 output is enabled, the presence speakers in the main zone do not output sound.
Page 29
Connecting front speakers that support bi-amp The unit (rear) connections SPEAKERS EXTRA SP2 EXTRA SP1 SURROUND BACK F.PRESENCE SURROUND CENTER FRONT / ZONE2 / BI-AMP / ZONE2 You can connect the front speakers that support bi-amp connections. To enable the bi-amp function, configure the necessary speaker settings. For details, see the following: •...
Connecting a TV HDMI connection with a TV HDMI connection with another TV or a projector Connect a TV to the unit with an HDMI cable. If you connect a TV that supports ARC to The unit has two HDMI output jacks. If you connect another TV or a projector to the unit the unit, you can output video/audio to the TV or input TV audio to the unit.
Connecting playback devices HDMI connection with a video device such as a Connection other than HDMI with a playback device BD/DVD player VIDEO (component video) connection with a video Connect a video device to the unit with an HDMI cable. device The unit (rear) HDMI 1–7 jacks...
Page 32
Audio output jacks on audio device Audio input jacks on the unit VIDEO (composite video) connection with a video Digital optical AUDIO 1–2 (OPTICAL) device AUDIO 3 (COAXIAL) Digital coaxial AV 1 (COAXIAL) Connect a video device to the unit with a video pin cable and a stereo pin cable. AUDIO 4–5 (AUDIO) Analog stereo Output jacks on video device...
Connecting to the jack on the front panel Use the AUX jack on the front panel to temporarily connect devices such as portable audio players to the unit. CAUTION ▪ Before making a connection, stop playback on the device and turn down the volume on the unit. The volume may be unexpectedly loud, and this could result in damage to hearing.
Connecting the radio antennas Assembling and connecting the AM antenna Connecting the FM/AM antennas (Except for U.K., Europe, Russia, Middle East and Australia models) Connect the supplied FM/AM antennas to the unit. Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface. FM antenna AM antenna TRIGGER OUT...
Connecting the DAB/FM antenna (U.K., Europe, Russia, Middle East and Australia models) Connect the supplied DAB/FM antenna to the unit and fix the antenna ends to a wall. DAB/FM antenna The unit (rear) TRIGGER OUT 0.1A HDMI ( HDCP HDMI OUT HDCP2.2 (1 MOVIE) (5 STB)
Preparing for connecting to a network Preparing for connecting to a network Internet Network Attached Storage (NAS) The unit supports wired and wireless connections. Select a connection method according to your network environment. If you are using a router that supports DHCP in the wired connection, you do not need to configure any network settings for the unit.
Preparing wireless antennas (wireless connection) Connecting other devices Stand the wireless antennas upright for connecting to the wireless network or a Connecting an external power amplifier Bluetooth device wirelessly. For information on how to connect the unit to a wireless network, see the following: When connecting an external power amplifier (pre-main amplifier) to enhance speaker •...
(1 MOVIE) (5 STB) (6 GAME) AC IN The trigger function can control an external device in conjunction with operating the unit (such as powering on/off and input selection). If you have a Yamaha subwoofer PRE OUT CENTER SUR. BACK SURROUND...
Plugging in the power cable Plugging in the power cable WARNING (Taiwan, Brazil and Central and South America models only) Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC wall outlet. Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a potential fire hazard.
Selecting the on-screen menu language Selecting the on-screen menu language To exit from the menu, press SETUP. This completes the necessary settings. Select the desired on-screen menu language. NOTE Press z (receiver power) to turn on the unit. The information on the front display is provided in English only. Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack).
Configuring the necessary speaker settings Assigning speaker configuration Configure the corresponding speaker settings. ▪ Using bi-amp connections or Zone2 speakers, select your speaker If you use any of the following speaker configurations, perform the following procedure system in “Power Amp Assign”. For details, see the following: to configure the corresponding speaker settings manually before performing YPAO.
Optimizing the speaker settings automatically The unit (front) (YPAO) The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room.
Page 43
If the measuring option is desired, use the Cursor keys to select Use the cursor keys to select “Save” and press ENTER. “Multi Measure” and press ENTER to check the box. NOTE ▪ If you perform the multi measure, the speaker settings will be optimized for you to enjoy surround sound in a wider space.
The following screen appears on the TV when the measurement at the first position YPAO measuring at multiple listening positions finishes. (multi measure) Select “Multi Measure” option if you will have several listening positions or if you want others to enjoy surround sound. You can take measurements at up to 8 different positions in the room.
Checking the YPAO measurement results To finish checking the results and return to the previous screen, press RETURN. You can check the YPAO measurement results. After the measurement, use the cursor keys to select “Measurement result” and press ENTER. NOTE You can also check the previous measurement results in the “Setup”...
Reloading the previous YPAO adjustments Press SETUP. This completes the settings. When the speaker settings you have configured manually are not suitable, follow the procedure below to discard the manual settings and reload the previous YPAO NOTE adjustments. For details, see the following: ▪...
“Quit” and press ENTER. Canceled by user operation Exit YPAO, and turn off and on the unit. If this error occurs ERROR 10 repeatedly, contact the nearest authorized Yamaha dealer or An internal error has occurred. service center. NOTE ▪...
Warning messages from YPAO Warning message Remedy Use the cursor keys to select “Measurement result” and press ENTER, and then select “Wiring” in “Measurement result”. If a warning message is displayed after the measurement, you can still apply the Check the cable connections (+/-) of the speaker identified by measurement results by following on-screen instructions.
Operate the “MusicCast CONTROLLER” application following the on screen instructions, then hold down CONNECT on the front MusicCast is a brand new wireless musical solution from Yamaha, allowing you to panel of the unit for 5 seconds. share music among all of your rooms with a variety of devices. You can enjoy music from your smartphone, PC, NAS drive and music streaming service anywhere in your house with one easy-to-use application.
The unit is equipped with a variety of sound programs and surround decoders that allow you to enjoy playback sources with your favorite sound mode (such as sound The unit is equipped with a variety of sound programs that utilize Yamaha's original field effect or stereo playback).
Enjoying sound field effects optimized for the type of Enjoying surround sound with 5 speakers placed in content front (Virtual CINEMA FRONT) The unit is equipped with a variety of sound programs. You can enjoy the surround sound even when the surround speakers are placed in front.
Enjoying unprocessed playback Enjoying original sound (straight decode) Enjoying multichannel playback without sound field effects (surround decoder) When STRAIGHT is pressed and the straight decode mode is enabled, the unit produces stereo sound from the front speakers for 2-channel sources such as CDs, Press SUR.
NOTE Enjoying pure high fidelity sound (Pure Direct) ▪ You can also change the surround decoder in “Surround Decoder” in the “Setup” menu. For details, see the following: When PURE DIRECT is pressed and the direct playback mode is enabled, the unit –...
Enjoying enhanced bass sound Enjoying enhanced compressed music Enhancing the bass (Extra Bass) Playing back digitally compressed formats with enriched sound (Compressed Music Enhancer) Press BASS to enable Extra Bass and enjoy enhanced bass sound, regardless of the size of the front speakers and the presence or absence of a subwoofer. Each time you press the key, Extra Bass is enabled or disabled.
Enjoying Dolby Atmos® and DTS:X™ Enjoying Dolby Atmos® and DTS:X™ Playing back Dolby Atmos or DTS:X content creates realistic sound that comes from every direction, including overhead. To receive the full effect of Dolby Atmos or DTS:X content, we recommend a speaker system with presence speakers. NOTE For details on the speaker system with the presence speakers, see the following: ▪...
Enjoying music in multiple rooms Playing back music in multiple rooms Connecting Zone2 speakers The multi-zone function allows you to play back different input sources in the room Connecting Zone2 speakers using the unit’s internal where the unit is installed (Main zone) and in another room (Zone2). amplifier For example, while you are watching TV in the living room (Main zone), another person can listen to radio in the study room (Zone2).
Page 57
When using surround back speakers in the main zone When using presence speakers in the main zone Connect Zone2 speakers to the EXTRA SP1 terminals. To utilize the EXTRA SP Connect Zone2 speakers to the EXTRA SP2 terminals. To utilize the EXTRA SP terminals for Zone2 speakers, set “Power Amp Assign”...
Operating the unit from Zone2 (remote connection) Connecting Zone2 speakers using an external amplifier Connect the external amplifier placed in Zone2 to the unit with a stereo pin cable. You can operate the unit or external devices from Zone2 using the remote control supplied with each device if you connect an infrared signal receiver/emitter to the NOTICE unit’s REMOTE IN/OUT jacks.
An infrared signal transmitter is not required if you are using Yamaha products that Use the input selection keys to select an input source. support remote connections, as the unit does. You can transmit remote control signals by connecting the REMOTE IN/OUT jacks with monaural mini-jack cables and an NOTE infrared signal receiver.
Enjoying the same source in multiple rooms (party mode) Press PARTY, and then the party mode allows you to play back in Zone2 the same music that is being played back in the main zone. During the party mode, stereo playback is automatically selected for all zones.
PLAYBACK Basic playback procedure Basic procedure for playing back video and music Start playback on the external device or select a radio station. Basic procedure for playing back video and music is as follows. Press VOLUME to adjust the volume. Turn on the external devices (such as a TV or BD/DVD player) NOTE connected to the unit.
Selecting an HDMI output jack Currently input source Displayed item HDMI Press HDMI OUT to select the HDMI OUT jacks for video/audio output. Input (input source name), DSP Program (sound mode name), Audio Each time you press the key, the HDMI OUT jack to be used for signal output Decoder (decoder name*) AUDIO changes.
Item names and functions of the playback screen External device Function operation keys Resumes playback from pause. The item names and functions of the playback screen, available when your TV is Stops playback. connected to the unit via HDMI, are as follows. Stops playback temporarily.
Item names and functions of the browse screen Icon Function Moves 10 pages backward. The item names and functions of the browse screen, available when your TV is Moves to the previous page of the list. connected to the unit via HDMI, are as follows. The browse screen appears when the Moves to the playback screen.
Listening to FM/AM radio (Except for U.K., Europe, Russia, Middle East and Australia models) Setting the frequency steps Press STRAIGHT to select “FM100/AM10”. (Asia and General models only) Press MAIN ZONE z to set the unit to standby mode and turn it At the factory, the frequency step setting is set to 50 kHz for FM and 9 kHz for AM.
Selecting a frequency for reception Press TUNING to set a frequency. You can tune into a radio station by specifying its frequency. Hold down the key for about a second to search stations automatically. NOTE MAIN MAIN MAIN ZONE 2 ZONE 2 ZONE 2 SLEEP...
Selecting a preset station Press TUNER to select “TUNER” as the input source. Tune into a registered radio station by selecting its preset number. “TUNER” is selected as the input source and the frequency currently selected is displayed on the front display. Press TUNER to select “TUNER”...
Registering a radio station manually Hold down MEMORY for a few seconds. Select a radio station manually and register it to a preset number. The first time that you do register a station, the selected radio station will be registered to the preset number “01”. Thereafter, each radio station NOTE you select will be registered to the next empty (unused) preset number You can register up to 40 radio stations as presets.
Clearing preset stations Clearing all preset stations Clear radio stations registered to the preset numbers. Clear all the radio stations registered to the preset numbers. Press TUNER to select “TUNER” as the input source. Press TUNER to select “TUNER” as the input source. “TUNER”...
Listening to DAB radio (U.K., Europe, Russia, Middle East and Australia models) Preparing the DAB tuning Press ENTER to start an initial scan. DAB (Digital Audio Broadcasting) uses digital signals for clearer sound and more LINK MASTER STEREO TUNED ZONE SLEEP PARTY ENHANCER...
Selecting a DAB radio station for reception Selecting a preset DAB radio station You can select a DAB radio station from the stations stored by the initial scan. Tune into a registered DAB radio station by selecting its preset number. Press TUNER to select “TUNER”...
NOTE Registering a DAB radio station as presets To select a preset number for registering, press MEMORY once after tuning into the desired radio station, press PRESET to select a preset number, and then press MEMORY again. Select a DAB radio station and register it to a preset number. LINK MASTER STEREO TUNED...
Clearing preset DAB radio stations Clearing all preset DAB radio stations Clear DAB radio stations registered to the preset numbers. Clear all the DAB radio stations registered to the preset numbers. Press TUNER to select “TUNER” as the input source. Press TUNER to select “TUNER”...
Displaying the DAB information The unit can receive various types of DAB information when it is tuned into a DAB radio station. Tune into the desired DAB radio station. Press INFO on the front panel to select between the various display items.
Checking reception strength of Frequency Channel label DAB frequency information 232.496 MHz each DAB channel label The unit supports Band III (174 to 240 MHz) only. 234.208 MHz 235.776 MHz Frequency Channel label Checking reception strength of 237.488 MHz 174.928 MHz 239.200 MHz each DAB channel label 176.640 MHz...
Listening to FM radio (U.K., Europe, Russia, Middle East and Australia models) Selecting a frequency for FM radio reception Press TUNING to set a frequency. You can tune into an FM radio station by specifying its frequency. Hold down the key for about a second to search stations automatically. NOTE MAIN MAIN...
Selecting a preset FM radio station Press TUNER to select “TUNER” as the input source. Tune into a registered FM radio station by selecting its preset number. Press BAND to select the FM band. Press TUNER to select “TUNER” as the input source. “TUNER”...
Registering an FM radio station manually Hold down MEMORY for a few seconds. Select an FM radio station manually and register it to a preset number. The first time that you do register an FM radio station, the selected radio station will be registered to the preset number “01”.
Clearing preset FM radio stations Clearing all preset FM radio stations Clear FM radio stations registered to the preset numbers. Clear all the FM radio stations registered to the preset numbers. Press TUNER to select “TUNER” as the input source. Press TUNER to select “TUNER”...
Displaying the Radio Data System information (U.K., Europe, Russia and Middle East models only) Radio Data System is a data transmission system used by FM stations in many countries. The unit can receive various types of Radio Data System data, such as “Program Service”, “Program Type”, “Radio Text”...
Playing back music stored on a Bluetooth® device Playback Bluetooth® device music on the unit On the Bluetooth device, select a song and start playback. You can play back music files stored on a Bluetooth device (such as smartphones) on The playback screen is displayed on the TV.
Enjoying audio using Bluetooth® speakers/ Use the cursor keys and ENTER to check the Bluetooth speakers/ headphones headphones to be connected with the unit. You can enjoy audio played back on the unit using Bluetooth speakers/headphones. Use the cursor keys to select “CONNECT” and press ENTER. When the connection process finishes, “Completed”...
Playing back music with AirPlay Playback of iTunes/iPhone music contents with Select a song and start playback. AirPlay The unit automatically selects “AirPlay” as the input source and starts playback. The AirPlay allows you to play back iTunes or iPhone/iPad/iPod touch music on the unit via network.
Playing back music stored on a USB storage device Playback of USB storage device contents Use the cursor keys to select an item and press ENTER. You can play back music files stored on a USB storage device on the unit. If a song is selected, playback starts and the playback screen is displayed.
Playing back music stored on media servers (PCs/NAS) Media sharing setup on media servers (PCs/NAS) Playing back music stored on media servers (PCs/ NAS) To play back music files stored on your media servers, first you need to configure the media sharing setting on each music server.
Page 86
Use the cursor keys to select an item and press ENTER. If a song is selected, playback starts and the playback screen is displayed. NOTE To return to the top level while on the browse screen, hold down RETURN. NOTE ▪...
Listening to Internet radio Selecting an Internet radio station Registering favorite Internet radio stations Select an Internet radio station and start playback. You can register the Internet radio station in playback at present to the “Favorites” folder. NOTE ▪ To use this function, the unit must be connected to the Internet. You can check whether the network While listening to Internet radio, press OPTION.
(such as the IP address) are properly assigned to the unit. For details, see the following: – “Checking the network information on the unit” (p.132) ▪ For details on music streaming services, see the supplements for streaming services. Access the Yamaha Downloads site to download the supplement.
Useful playback functions SCENE function To select a desired SCENE name, press ENTER. MAIN MAIN MAIN ZONE 2 ZONE 2 ZONE 2 SLEEP SLEEP SLEEP Selecting the input source and favorite settings with PARTY PARTY PARTY PURE DIRECT PURE DIRECT PURE DIRECT HDMI OUT HDMI OUT...
Page 90
By default, the following settings are registered for each scene. Zone2 Main Zone SCENE Input AV 1 TUNER AUDIO2 NET RADIO SCENE Volume -40.0 dB -40.0 dB -40.0 dB -40.0 dB NET Audio SCENE name Movie Viewing Radio Listening Music Listening Tone Control Auto Auto...
Page 91
Registering a scene Hold down the desired numbered key (1 to 8) until “SET Complete” appears on the front display or on the TV. You can change the default setting and register the function that is assigned to each numbered key (1 to 8). LINK MASTER STEREO...
Shortcut function Hold down MEMORY for a few seconds. MAIN MAIN MAIN ZONE 2 ZONE 2 ZONE 2 SLEEP SLEEP SLEEP Registering a favorite content as shortcut PARTY PARTY PARTY PURE DIRECT PURE DIRECT PURE DIRECT HDMI OUT HDMI OUT HDMI OUT SCENE SCENE...
Page 93
NOTE Recalling a registered content as shortcut ▪ “No Presets” appears on the front display when no items are registered. Recall a registered content (Bluetooth, USB, media server and network content) by ▪ The registered item cannot be recalled in the following cases. selecting the shortcut number.
Configuring playback settings for different playback sources (Option menu) Basic operation of the Option menu Use the cursor keys to select a setting. Perform the following basic procedure to operate the “Option” menu. With the “Option” Press OPTION. menu, you can configure different playback settings according to the input source currently being played back.
Option menu items Item Function Page Shuffle / Shuffle (Shuffle) Configures the shuffle setting. p.100 Repeat Use the following table to configure playback settings of the unit. (Shuffle / Repeat (Repeat) Configures the repeat setting. p.100 Repeat) NOTE FM Mode (FM Switches between “Stereo”...
Adjusting the tone of the audio output Configuring the volume automatically based on the YPAO measurement results Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) individually. Adjusting the high- and low-frequency levels Option menu “Tone Control” automatically according to the volume Choices Enables/disables YPAO Volume.
Adjusting the volume or perceive height of dialogue Adjusting the dynamic range automatically sounds Sets whether the dynamic range (from maximum to minimum) is automatically adjusted to the volume when “YPAO Volume” is set to “On”. When “Adaptive DRC” is set to “On”, it is useful for listening to playback at a low volume at night.
Adjusting the delay of the Lipsync function Adjusting the perceived height of dialogue sound Adjusts the perceived height of dialogue sounds when the position (height) of dialogue Adjusts the delay between video and audio output manually when “Delay Enable” in sound is artificial.
Correcting volume differences during playback Setting the use of Extra Bass Enables/disables Extra Bass. When Extra Bass is enabled, you can enjoy enhanced Correcting volume differences between input sources bass sounds, regardless of the size of the front speakers and the presence or absence of the subwoofer.
Enabling the video signal processing Configuring the shuffle/repeat setting Enables/disables the video signal processing (resolution and aspect ratio) settings Configuring the shuffle setting configured in “Resolution” and “Aspect” in the “Setup” menu. For details, see the following: Configure the shuffle setting for playback. •...
Switching between stereo and monaural for FM radio Press TUNER to select “TUNER” as the input source. reception “TUNER” is selected as the input source and the frequency currently selected is displayed on the front display. Switch between stereo and monaural for FM radio reception. When the signal reception for an FM radio station is unstable, switching to monaural may improve it.
Page 102
Clearing preset stations Clearing all preset stations Clear radio stations registered to the preset numbers. Clear all the radio stations registered to the preset numbers. Option menu Option menu “Preset” > “Clear Preset” “Preset” > “Clear All Preset” Press TUNER to select “TUNER” as the input source. Press TUNER to select “TUNER”...
Adding an Internet radio station to the “Favorites” Performing an initial scan for DAB radio reception folder (U.K., Europe, Russia, Middle East and Australia models only) Perform an initial scan for searching DAB radio stations. Register the currently playing Internet radio station to the “Favorites” folder. Option menu Option menu “Init Scan”...
Checking reception strength of each DAB channel Checking the current status information label Displays the current status information as follows. Option menu (U.K., Europe, Russia, Middle East and Australia models only) “On-screen Information” You can check reception strength of each DAB channel label. Option menu Press OPTION.
CONFIGURATIONS Configuring various functions (Setup menu) Basic operation of the Setup menu Use the cursor keys to select a menu and press ENTER. Perform the following basic procedure to operate the “Setup” menu. You can configure the unit’s various functions with the “Setup” menu. NOTE ▪...
Setup menu items Use the following table to configure various functions of the unit. Menu Item Function Page Selects a speaker system. p.110 Power Amp Assign Front Selects the size of the front speakers. p.110 Center Selects whether or not a center speaker is connected and its size. p.111 Surround Selects whether or not surround speakers are connected and their size.
Page 107
Menu Item Function Page Decode Type Selects a surround decoder to be used. p.123 Surround Decoder Center Spread Selects whether to spread the center channel signals to left and right when 2-channel source is played. p.124 Center Image Adjusts the center localization (broadening effect) of the front sound field. p.124 Adjusts the entire volume for “7ch Stereo”.
Page 108
Menu Item Function Page Information Displays the network information on the unit. p.132 Network Connection Selects the network connection method. p.132 IP Address Configures the network parameters (such as IP address). p.133 Selects whether to enable/disable the function that turns on the unit from other network devices. p.133 Network Standby Filter...
Page 109
Menu Item Function Page Information Displays the system information on the unit. p.142 Language Selects an on-screen menu language. p.142 Audio In Combines the video jack of the selected input source with an audio jack of others. p.143 Sets which input source is skipped when operating the INPUT key. p.144 Input Skip Input Rename...
Configuring the speaker settings Setting your speaker system Setting the size of the front speakers Select the setting according to the speakers that are connected. Selects the setting according to the size of your front speakers. Setup menu Setup menu “Speaker”...
Setting the use of a center speaker and its size Setting the use of surround speakers and their size Selects the setting according to the use and size of your center speaker. Selects the setting according to the use and size of your surround speakers. Setup menu Setup menu “Speaker”...
Setting the layout of the surround speakers Setting the use of surround back speakers and their size Selects a surround speaker layout when surround speakers are used. Setup menu Selects the setting according to the use and size of your surround back speakers. “Speaker”...
Setting the use of presence speakers and their size Setting the layout of the presence speakers Selects the setting according to the use and size of your presence speakers. Selects a presence layout when presence speakers are used. This setting facilitates the optimization of the sound field effect.
Setting the use of a subwoofer Setting the distance between each speaker and the listening position Selects the setting according to the use of your subwoofer. Setup menu Sets the distance between each speaker and the listening position so that sounds from the speakers reach the listening position at the same time.
Setting the equalizer Use the cursor keys to select a center frequency from the 7 preset bands (4 for subwoofer). Selects the type of equalizer to be used and adjusts the tone. Setup menu “Speaker” > “Parametric EQ” > “Parametric EQ” Settings Manual Select this option when you want to adjust the equalizer manually.
Outputting test tones Enables/disables the test tone output. Test tone output helps you to adjust the speaker balance or equalizer while confirming its effect. Setup menu “Speaker” > “Test Tone” Settings Does not output test tones. Outputs test tones automatically when you adjust the speaker balance or equalizer.
Configuring the sound settings Checking the current audio signal information Enabling Lipsync adjustment Displays information about the current audio signal. Enables/disables the “Lipsync” adjustment configured in “Auto/Manual Select” in the “Setup” menu. Setup menu NOTE “Sound” > “Information” For details on “Auto/Manual Select” in the “Setup” menu, see the following: Format Audio format of the input signal ▪...
Setting the adjustment method of the Lipsync Adjusting the delay of the Lipsync function function Adjusts the delay between video and audio output manually when “Auto/Manual Select” is set to “Manual”. You can fine-adjust the audio output timing when “Auto/ Selects the method for adjusting the delay between video and audio output.
MOVIE Selecting sound programs This program allows listeners to enjoy the rich vividness of sport Selects the sound program to change the settings of the sound program. broadcasts and light entertainment programs. In sports broadcasts, the Sports commentators’ voices are positioned clearly at the center, while the NOTE atmosphere inside the stadium is realistically conveyed by the peripheral You can select a sound program by pressing PROGRAM.
This program reproduces monaural video sources, such as classic Adjusting the delay between the direct sound and movies, in an atmosphere of a good old movie theater. The program Mono Movie presence sound field generation creates a pleasant space with depth, by adding breadth and the appropriate reverberation to the original audio.
Adjusting the loss of the presence sound field Adjusting the delay between the direct sound and reverberant sound generation Adjusts the loss of the presence sound field. Setup menu Adjusts the delay between the direct sound and reverberant sound generation. Higher to enhance the delay effect, and lower to reduce it.
Adjusting the delay between the direct sound and Adjusting the loss of the surround sound field surround sound field generation Adjusts the loss of the surround sound field. Setup menu Adjusts the delay between the direct sound and surround sound field generation. Higher to enhance the delay effect, and lower to reduce it.
Settings Adjusting the broadening effect of the surround back sound field Uses the decoder automatically selected by input source. The DTS Neural:X decoder is selected for DTS sources and the Dolby Surround Auto decoder is selected for other sources. Adjusts the broadening effect of the surround back sound field. Dolby Surround decoder.
Setting the use of Center Spread Adjusting the entire volume for “7ch Stereo” Selects whether to spread the center channel signals to left and right when a 2- Adjusts the entire volume. This setting is effective when “7ch Stereo” is selected. channel source is played.
Adjusting the height volume balance using the Setting the dynamic range adjustment method presence speakers for “7ch Stereo” Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. Adjusts the height volume balance using the presence speakers. Higher to enhance Setup menu the upside, and lower to enhance the downside.
Setting the initial volume for when the unit is turned Setting Virtual Surround Back Speaker (VSBS) Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers. Sets the initial volume when the unit is turned on. When VSBS is enabled, the unit creates VSBS when no surround back speakers are Setup menu connected.
Configuring the scene settings Choices Selecting items to be included as the scene assignments HDMI Control Control Sync (HDMI Control (p.130)) Input Input (p.61) Selects items to be included as the scene assignments. You can also view the settings [Input sources: TUNER, (network sources), SERVER, NET RADIO, Bluetooth, USB] currently assigned to the selected scene.
Renaming the SCENE name Changes the SCENE name displayed on the front display or on the TV. Setup menu “Scene” > “Scene Rename” Use the cursor keys to select the SCENE name and press ENTER to enter the name edit screen. Use the cursor keys and ENTER to rename.
Configuring the video/HDMI settings Checking the current video and HDMI signal Setting a resolution to output HDMI video signals information Selects a resolution to output HDMI video signals when “Video Mode” is set to “Processing”. Displays information about the current video signal and the TVs connected to the HDMI OUT jacks.
Setting an aspect ratio to output HDMI video signals Setting the audio jack used for TV audio input Selects an aspect ratio to output HDMI video signals when “Video Mode” is set to Selects an audio input jack of the unit to be used for TV audio input when “HDMI “Processing”.
Linking the standby modes of the unit and the TV Setting the version of HDCP used on the HDMI input jacks Select whether to use HDMI control to link the unit's standby mode to the TV's power when “HDMI Control” is set to “On”. Selects the HDCP version of the HDMI input jacks for watching 4K video content.
Configuring the network settings Checking the network information on the unit Setting the network connection method (Wired/ Wireless) Displays the network information on the unit. Setup menu Selects the network connection method. “Network” > “Information” Setup menu “Network” > “Network Connection” IP Address IP address Subnet Mask...
Setting the network parameters manually Setting the use of the Network Standby function Set the network parameters (such as IP address, Subnet Mask, and Default Gateway) Selects whether the unit can be turned on from other network devices (network manually. standby).
Setting the MAC address filter Setting the use of a Digital Media Controller Sets the MAC address filter to limit access to the unit from other network devices. Selects whether to allow a Digital Media Controller (DMC) to control playback. A Digital Media Controller (DMC) is a device that can control other network devices through the NOTE network.
Setting the network name of the unit Edits the network name (the unit’s name on the network) displayed on other network devices. Setup menu “Network” > “Network Name” Press ENTER to enter the name edit screen. Use the cursor keys and ENTER to edit the name. NOTE ▪...
Configuring the Bluetooth® settings Setting the use of Bluetooth® Setting the use of the Bluetooth® Standby function Enables/disables the Bluetooth function. Selects whether to enable/disable the function that turns on the unit from Bluetooth devices (Bluetooth standby). If this function is set to “On”, the unit automatically turns Setup menu on when a connect operation is performed on the Bluetooth device.
Setting the use of audio transmission to a Bluetooth® Connecting the unit to a Bluetooth® device that device receives transmitted audio Enables/disables the Bluetooth audio transmitter function. Establishes a connection between the unit and Bluetooth devices that receive audio transmitted from the unit, such as speakers and headphones, when "Transmitter" is set When this function is enabled, you can enjoy audio played back on the unit using to "On"...
Configuring the multi zone settings Checking the Zone2 information Setting the Zone2 limit value of the volume Displays information about Zone2. Sets the Zone2 limit value of the volumes. Setup menu Setup menu “Multi Zone” > “Information” “Multi Zone” > “Zone2” > “Max Volume” Setting range On/Off The power on/off for Zone2...
Setting the Zone2 initial volume for when the unit is Adjusting the time deviation in relation to the main turned on zone Sets the Zone2 initial volume for when the unit is turned on. Adjusts the time deviation in relation to the main zone. Setup menu Setup menu “Multi Zone”...
Setting the use of Compressed Music Enhancer for Setting the use of Extra Bass for Zone2 output Zone2 output Enables/disables Extra Bass for Zone2 output. When Extra Bass is enabled, you can enjoy enhanced bass sounds, regardless of the size of speakers. Enables/disables Compressed Music Enhancer for Zone2 output.
Renaming the zone name Setting the use of switching to the party mode on Zone2 Changes the zone name displayed on the TV screen. Setup menu Enables/disables switching to the party mode. “Multi Zone” > “Zone Rename” Setup menu “Multi Zone” > “Party Mode Set” > “Target : Zone2” Use the cursor keys to select a zone name to be renamed and Settings press ENTER.
Configuring the system settings Checking the system information on the unit Setting the on-screen menu language Displays the system information on the unit. Select the on-screen menu language. Setup menu Setup menu “System” > “Information” “System” > “Language” Settings Remote ID The unit’s remote control ID setting TV Format The unit’s video signal type...
Necessary setting Combining audio of another input source with video For example, if you have connected a video device to AV 1 (COMPONENT VIDEO) of the current input source and AV 2 (AUDIO) jack of the unit, change the combination setting as follows. Select the audio of a different input source to play back together with the video of the Video output currently selected input source.
Setting input sources to be skipped when operating Press INPUT to select “AV 1” (video input jack to be used) as the the INPUT key input source. Set which input sources are skipped when operating the INPUT key. Press SETUP. You can select the desired input source quickly by using this function.
Automatically changing the input source names Manually changing the input source names displayed on the front display displayed on the front display Automatically changes the input source names displayed on the front display. You can Allows the input source names displayed on the front display to be set manually. select a name created by the Auto Rename function.
Setting the use of Auto Play function Setting the function for the PROGRAM key on the remote control Enables/disables Auto Play function in Internet streaming services and following input sources. Sets the function that is assigned to the PROGRAM key on the remote control. You can Setup menu use the PROGRAM key for other than DSP program selection.
Setting the unit's functions for the RED/GREEN/ Setting the scale of the volume display YELLOW/BLUE keys of the remote control Switches the scale of the volume display. Setup menu Set the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control. “System”...
Specifying the condition for the TRIGGER OUT jack to Switching the output level for electronic signal function transmission manually Specifies the condition for the TRIGGER OUT jack to function. Switches the output level for electronic signal transmission manually when “Trigger Mode”...
Setting the amount of time for the auto-standby Setting the use of the eco mode function You can reduce the unit’s power consumption by setting the eco mode to “On”. After changing the setting, be sure to press ENTER to restart the unit. Set the amount of time for the auto-standby function.
Updating the firmware via the network Updates the firmware via the network. You can also check the firmware version and system ID. Setup menu “System” > “Firmware Update” Choices Firmware Update Starts the process to update the unit’s firmware. Displays how to update the firmware using a USB memory device in the USB Update “ADVANCED SETUP”...
Configuring the advanced settings (ADVANCED SETUP menu) Basic operation of the ADVANCED SETUP menu ADVANCED SETUP menu items Perform the following basic procedure to operate the “ADVANCED SETUP” menu while Use the following table to configure system settings of the unit. viewing the front display.
LINK MASTER STEREO TUNED ZONE SLEEP PARTY ID1). When using multiple Yamaha AV receivers, you can set each remote control with ENHANCER YPAO VOL. A- DRC VOL. MUTE VIRTUAL TV FORMAT•NTSC a unique remote control ID for its corresponding receiver.
Removing the limitation on HDMI video output Selecting the HDMI 4K signal format (4K MODE) (MON.CHK) LINK MASTER STEREO TUNED ZONE SLEEP PARTY ENHANCER YPAO VOL. A- DRC VOL. MUTE VIRTUAL 4K MODE•MODE 1 LINK MASTER STEREO TUNED ZONE SLEEP PARTY SB SBR ENHANCER...
Setting DTS Format Notification (DTS MODE) When “Complete” appears on the front display, press z (power) to set the unit to standby mode and turn it on again. LINK MASTER STEREO TUNED ZONE SLEEP PARTY ENHANCER YPAO VOL. A- DRC If “Failed”...
Restoring the default settings (INIT) Checking the firmware version (VERSION) LINK MASTER STEREO TUNED ZONE LINK MASTER STEREO TUNED ZONE SLEEP PARTY SLEEP PARTY ENHANCER YPAO VOL. A- DRC ENHANCER YPAO VOL. A- DRC VOL. MUTE VIRTUAL VOL. MUTE VIRTUAL INIT••••CANCEL VERSION••xx.xx SB SBR...
If the problem you are experiencing is not listed or if the instructions do not help, turn l Because of a power failure, the unit's power is no longer synchronized. off the unit, disconnect the power cable, and contact the nearest authorized Yamaha Disconnect the HDMI cables and power cables, and after five minutes, reconnect dealer or service center.
Page 157
The power turns off (standby mode) immediately The unit is not reacting l The unit was turned on while a speaker cable was shorted. l The internal microcomputer is frozen, due to an external electric shock (such as lightning or excessive static electricity) or to a drop in the power supply Twist the bare wires of each speaker cable firmly and reconnect to the unit and voltage.
Audio trouble Cannot select the desired input source even if “INPUT” is pressed No sound l The function which skips some input sources is set. Set “Input Skip” of the desired input source in the “Setup” menu to “Off”. For l Another input source is selected.
Page 159
No sound is coming from a specific speaker No sound is coming from the subwoofer l The playback source does not contain a signal for the channel. l The playback source does not contain Low Frequency Effect (LFE) or low- frequency signals.
Page 160
No sound from the playback device connected to the Only the front speakers work on multichannel audio unit with HDMI l The playback device is set to output 2-channel audio (such as PCM) only. To check it, display information about the current audio signal on the TV. If l The TV does not support HDCP (High-bandwidth Digital Content Protection).
Video trouble No image (contents required the HDCP 2.2/2.3 - compatible HDMI device) from the playback device No video l The TV (HDMI input jack) does not support HDCP 2.2/2.3. Connect the unit to the TV (HDMI input jack) that supports HDCP 2.2/2.3. (The l Another input source is selected on the unit.
FM/AM radio trouble (AM radio feature is not Radio stations cannot be selected automatically available for the U.K., Europe, Russia, Middle East l Your area is too far from the FM station transmitter. and Australia models) Select the station manually. Or use an outdoor antenna. We recommend using a sensitive multi-element antenna.
DAB radio trouble (U.K., Europe, Russia, Middle East DAB radio reception is weak or noisy and Australia models) l There is multi-path interference. Check reception strength in “Tune AID” in the “Option” menu, and adjust the antenna height or orientation, or place it in a different location. For details, see the No DAB radio reception following: –...
USB trouble Network trouble The unit does not detect the USB device The network feature does not function l The USB device is not connected to the USB jack securely. l The network parameters (IP address) have not been obtained properly. Turn off the unit, reconnect your USB device, and turn the unit on again.
Page 165
The unit does not detect the media server (PC/NAS) The Internet radio cannot be played l The media sharing setting is not correct. l The selected Internet radio station is currently not available. Configure the sharing setting and select the unit as a device to which music There may be a network problem at the radio station, or the service may have contents are shared.
Bluetooth® trouble The application for mobile devices does not detect the unit A Bluetooth® connection cannot be established l The unit and mobile device are not in the same network. Check the network connections and your router settings, and then connect the unit l The Bluetooth function of the unit is disabled.
Page 167
No sound is produced, or the sound is interrupted during playback with Bluetooth® connection l The volume of the Bluetooth device is set too low. Turn up the volume of the Bluetooth device. l The Bluetooth device is not set to send audio signals to the unit. Switch the audio output of the Bluetooth device to the unit.
Check SP Wires The speaker cables are short circuited. • “Connecting the speaker” (p.19) An internal error has occurred. Contact the nearest authorized Yamaha dealer or service center. Internal Error No content There are no playable files in the selected folder.
Page 169
Message Cause Remedy Press STRAIGHT and select a firmware updating method, then press INFO to update the firmware again. For details, see the following: Firmware update failed. Update failed. • “Updating the firmware (UPDATE)” (p.155) • “Updating the unit’s firmware via the network” (p.171) FILE NOT READY Preparation for firmware update is not finish yet.
In this case, contact your nearest authorized Yamaha dealer or service center to request repair. released as needed. If the unit is connected to the Internet, new firmware is downloaded via the network.
For details on using the USB memory device, see the following: – “Updating the firmware (UPDATE)” (p.155) ▪ For details on update, visit the Yamaha website. ▪ If you want to perform update when turning off the unit, use the cursor keys to select “LATER” and press ENTER in step 2.
Using wireless surround speakers (MusicCast Surround function) Using wireless surround speakers (MusicCast Sample speaker layout Surround function) The following is a 5.1.2-channel system using two MusicCast 20 speakers as the surround speakers and one MusicCast SUB 100 as the subwoofer. Using devices that support the MusicCast Surround function, you can enjoy a 5.1.2- channel or 5.1-channel system with wireless surround speakers and subwoofer.
Page 173
Tap the settings icon. Tap “MusicCast Surround/Stereo”. For detailed setup instructions, refer to the following. https://download.yamaha.com/files/tcm:39-1212383 Adjust the speaker settings automatically (YPAO). NOTE ▪ For details on YPAO, see the following: – “Optimizing the speaker settings automatically (YPAO)” (p.42) ▪ Multi measurement cannot be used.
Connecting to a network wirelessly Selecting a wireless network connection method Press z (receiver power) to turn on the unit. Select a wireless connection method according to your network environment. Turn on the TV and switch the TV input to display video from the NOTE unit (HDMI OUT jack).
Setting up a wireless connection using the WPS Setting up a wireless connection using an iOS device button You can set up a wireless connection by applying the connection settings on iOS devices (iPhone/iPad/iPod touch). You can easily set up a wireless connection with one push of the WPS button. Before proceeding, confirm that your iOS device is connected to a wireless router.
Page 176
Use the cursor keys to select “Share Wi-Fi Settings (iOS)” and Select the network (access point) of which you want to share the press ENTER. settings with the unit. Tap here to start setup Use the cursor keys to select “NEXT” and press ENTER. Read the on-screen description and select “NEXT”...
Setting up a wireless connection by selecting from Use the cursor keys to select “NEXT” and press ENTER. the list of available access points After searching for access points, the list of available access points appears on the TV. You can set up a wireless connection by selecting an access point from the list of wireless LAN routers (access points) found by the unit.
Setting up a wireless connection manually When finished entering the key, use the cursor keys to select “NEXT” and press ENTER. You can set up a wireless connection by entering the required information manually. The wireless connection setting screen appears on the TV. You need to set up the SSID (network name), encryption method and security key for your network.
Page 179
When finished entering the key, use the cursor keys to select Use the cursor keys to select “CONNECT” and press ENTER to “NEXT” and press ENTER. start the connection process. When the connection process finishes, “Completed” appears on the TV Use the cursor keys to select the encryption method.
Setting up a wireless connection by using the WPS PIN code You can set up a wireless connection by entering the unit’s PIN code into the wireless router (access point). The method is available if the wireless router (access point) supports the WPS PIN code method.
Input/output jacks and cables Video/audio jacks Video jacks HDMI jacks COMPONENT VIDEO jacks Transmit digital video and digital sound through a single jack. Use an HDMI cable. Transmit video signals separated into three components: luminance (Y), chrominance blue (Pb), and chrominance red (Pr). Use a component video cable with three plugs. HDMI cable (5 STB ) ( 1 MO VIE )
Audio jacks OPTICAL jack Transmit digital audio signals. Use a digital optical cable. If there is a protective cap on the tip of the cable, remove it before using the cable. Digital optical cable AUDI O 1 (7 TV ) OPTIC AL COAXIAL jacks Transmit digital audio signals.
Using presence speakers Presence speaker layout Installing the presence speakers in Overhead position The following three layout patterns are available for the presence speakers. Choose a layout pattern that suits your listening environment. Install the presence speakers to the ceiling above the listening position (Overhead). •...
Using Dolby Enabled speakers as the presence speakers Use Dolby Enabled speakers as the presence speakers. This utilizes sound reflected from ceiling and lets you enjoy overhead sound only from speakers that are placed at the same level as traditional speakers. NOTE ▪...
Glossary Glossary of audio information Dolby TrueHD Dolby TrueHD is an advanced lossless audio format developed by Dolby Laboratories, Inc. to offer a high-definition home theater experience with the quality of the studio master. Dolby TrueHD can carry up to eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) Glossary of audio decoding format simultaneously.
DTS:X DTS:X is the next generation object-based, multi-dimensional audio technology from DTS. Windows standard audio file format, which defines the method of recording the digital data Unbound from channels, DTS:X conveys the fluid movement of sound to create an incredibly rich, obtained by converting audio signals.
While This is a glossary of the technical terms related to Yamaha technologies used in this remaining compatible with the color gamut of sRGB standards, “x.v.Color” expands the color manual.
YPAO (Yamaha Parametric room Acoustic Optimizer) The following USB devices can be used by the unit. The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, • This unit is compatible with USB memory devices that are in FAT16 or FAT32 format.
Supported file formats Video signal flow The following file formats can be used by the unit. Video signal flow Sampling Support for Quantization Number of File frequency Bitrate (kbps) gapless bit (bit) channels Video signals input from a video device to the unit are output to a TV as follows. (kHz) playback 32/44.1/48/...
Video conversion table Video conversion table is shown as follows. NOTE ▪ You can select the resolution and the aspect ratio applied to HDMI-output video processing in “Video Mode” in the “Setup” menu. For details, see the following: – “Setting the use of the video signal processing” (p.129) ▪...
Additional information on HDMI (Example) HDMI Control and synchronized operations HDMI Control HDMI Control HDMI Control allows you to operate external devices via HDMI. If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as power and volume) with TV remote control operations.
Audio Return Channel (ARC) Turn on the unit and playback devices and then turn on the TV. ARC allows you to input TV audio to the unit with the HDMI cable which transmits video Switch the TV input to display the video from the unit. signal to the TV.
HDMI signal compatibility Confirm the following HDMI signal used by the unit. • When CPPM copy-protected DVD-Audio is played back, video/audio signals may not be output, depending on the type of the DVD player. • The unit is not compatible with HDCP-incompatible HDMI or DVI devices. For details, refer to the instruction manual for each device.
United States and other countries. The trademarks used in this manual are as follows. Internet Explorer, Windows Media Audio and Windows Media Yamaha Eco-Label is a mark that certifies products of high Player are either registered trademarks or trademarks of Microsoft environmental performance.
Specifications Other jacks Specifications • YPAO MIC x 1 • REMOTE IN x 1 The specifications of this unit are as follows. • REMOTE OUT x 1 • TRIGGER OUT x 1 Input jacks • RS-232C x 1 Analog Audio HDMI •...
Page 196
TUNER Internet Radio Wi-Fi function Analog Tuner • Capable of WPS by PIN Method and Push-Button-Method • [U.K., Europe, Russia and Middle East models] • Capable of sharing with iOS devices by wireless connection DAB/FM with Radio Data System x 1 (TUNER) •...
Page 197
Maximum Effective Output Power (1-channel driven) Total Harmonic Distortion (1 kHz, 10% THD, 8 Ω) • PHONO to Front (20 Hz to 20 kHz, 10 V) 0.02% or less 160 W/ch – Front L/R, Center, Surround L/R, Surround Back L/R 0.06% or less •...
Page 198
Video Maximum Input Level Antenna 1.5 Vp-p or more 75 Ω unbalanced FM Section General Tuning Range Power Supply • [U.S.A. and Canada models] 87.5 MHz to 107.9 MHz • [U.S.A. and Canada models] AC 120 V, 60 Hz • [Asia, Taiwan, Brazil, Central and South •...
Page 199
(17-1/8” x 9-3/4” x 15”) Weight 11.0 kg (23.4 lbs) * The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website then download the manual file.
Default settings Default settings of the Option Video Processing Test Tone • Video Mode Direct menu YPAO Result Video Out • Result The default settings of the “Option” menu are as follows. Sound Shuffle / Repeat • Shuffle Treble, Bass Tone Control Information Bypass (0.0 dB)
Page 201
Scene System DMC Control Enable Scene Setting Information AirPlay Volume Interlock Limited Scene Rename Language English Network Name Video/HDMI Audio In MusicCast Link Power Interlock Information Input Skip Bluetooth Video Mode Input Rename Bluetooth • Video Mode Direct • HDMI 1-7 Auto •...
Memory Guard Firmware Update Default settings of the ADVANCED SETUP menu The default settings of the “ADVANCED SETUP” menu are as follows. SP IMP. 8 Ω MIN REMOTE ID FM50/AM9 (Asia and General models only) TV FORMAT • U.S.A., Canada, Korea and General NTSC models •...