Additional Functions - Samsung VR30T80 Series User Manual

Additional functions

Additional functions
Energy-Saving
Mode
Downtime Mode
Scheduled Cleaning
Setting the No-go
Zones
❇ You can set the Downtime mode, Scheduled Cleaning or No-go Zones at the SmartThings App.
NOTE
• When a Check Notice occurs or when you carry the Jet Bot to another place and start
cleaning, the Jet Bot spins left and right at a 30 degree angle to recognize its location before
it starts cleaning.
• If the Jet Bot cannot recognize its current location, it starts Auto Clean.
• The Jet Bot automatically performs a system check and restarts once a week.
22 English
• When charging is complete, the Jet Bot automatically enters the
Sleep Mode. While the Jet Bot is docked on the Docking Station,
press and hold the [
To cancel the Sleep Mode, start cleaning or press the [
7 seconds.
❇ When the Jet Bot is in the Energy-Saving Mode, the power is turned
off after charging is complete which means the Wi-Fi reception
waiting is not enabled, therefore the Jet Bot cannot be controlled
with the mobile app.
• You can set the Jet Bot not to clean within the Downtime at the
Settings.
❇ When Downtime comes, the Jet Bot returns to the Docking Station.
• You can set the Jet Bot to clean at the Schedule.
❇ If the Jet Bot is detached from the Docking Station at the scheduled
time, the scheduled cleaning does not work.
• When the Jet Bot has saved a map, you can set the Jet Bot not to
enter a designated area.
❇ If the Jet Bot does not start cleaning from the Docking Station or the
installation place of the Docking Station has been changed, the Jet
Bot may clean the set No-go Zones.
❇ When setting the No-go Zones, you cannot include the Docking
Station.
Operation
] for 7 seconds to set it to the Sleep Mode.
] for