Installation; Installing A Docking Station - Samsung VR30T80 Series User Manual

INSTALLATION

Installing a Docking Station

Approximately
1 Connect the provided Battery Charger jack
to the rear of the Docking Station.
NOTE
• Install the Docking Station in a place where the floor and wall are level.
• If the Battery Charger cord is too long for the installation environment, coil the power cord
around the cable management post, then put it in the fixing groove at the rear of the Docking
Station.
0.5 m
Approximately
1m
Approximately
0.5 m
2 Position the Battery Charger cord into the
fixing groove at the rear of the Docking
Station.
3 Connect the power cord to the Battery
Charger.
4 Place the Docking Station on an even floor
and near an electrical outlet and plug it in.
English 15