Table of Contents
Advertisement
Checking if the docking (recharging) does not work
Check the Docking Station's installation
status.
• Check whether the Docking Station has
been installed in a place where the Docking
Station cannot guide the Jet Bot to return.
• Check whether the distance between the
Docking Station and the Jet Bot is over
5 m.
– It may take a longer time for the Jet Bot
to return to the Docking Station.
NOTE
• If the power switch of the Jet Bot is off, the Jet Bot will not charge even if it is docked on the
Docking Station.
– Keep the Docking Station on at all times.
– If power is not supplied to the Docking Station, the Jet Bot cannot find the Docking Station
and cannot automatically recharge.
• If the Jet Bot is left detached from the Docking Station, the battery drains naturally.
18
English
Charge the Jet Bot manually for the following
conditions.
• When the Docking Station is installed in a
corner
• When the battery is completely discharged
• When the Jet Bot is stuck in an obstacle
(e.g., furniture)
• When the Jet Bot cannot climb a threshold
near the Docking Station. (It should be less
than 1.5 cm.)
• When the Jet Bot's Status Indicator turns
red and stays red with the Jet Bot not
working
Advertisement
Table of Contents
