Table of Contents
Advertisement
• Be careful that the LiDAR sensor is not exposed to a direct light such as
sun light, infrared light, etc.
– The direct light can affect the performance of the LiDAR sensor.
• When carrying the Jet Bot, be careful not to let it drop.
– The impact from the drop can affect the operation or performance of the
LiDAR sensor.
• Do not look at the transmitting part (a laser) of the revolving LiDAR
sensor horizontally.
• Be careful not to insert a tool such as a chopstick into the revolving LiDAR
sensor. Otherwise, the LiDAR sensor may work abnormally or malfunction.
• Before cleaning, remove objects which are less than 9 cm height and are
lightly on the floor as the Jet Bot can push along them, or the objects can
be caught in the Jet Bot's spin brush or driving wheels. (Fixed objects
can be detected by the Jet Bot when its bumper is pressed and will avoid
them.)
• If oil such as cooking oil is on the floor, the Jet Bot may become stationary
because the floor is slippery. Remove the oil first before cleaning with the
Jet Bot.
12
English
Advertisement
Table of Contents
