Module And Smu Signal Cable Connection - Samsung 93PM Installation Manual

3.10.6 Module and SMU Signal Cable Connection

Connect the signal cables for SMU and Module BMS's for each module.
NOTICE

Use the proper signal cables as specified by the part numbers below.
WARNING
Rack BMS / Module BMS Damage
Do not insert both ends of the signal cable WIRE ASSY MODULE TO MODULE #1 or WIRE ASSY
MODULE TO MODULE #2 into the same Battery Module.
Connect the signal cable "WIRE ASSY RACK TO MODULE" between the SMU "MODULE" connector and
1.
Module #1 "Right Connector".
English 8/2020. Rev 0.3
Figure 3-93: SMU to Module #1 Signal Cable
.
3 Installing the Product
79