Figure 3-22: Inserting Smps Assembly; Figure 3-23: Attaching The Smps Assembly - Samsung 93PM Installation Manual

4. Insert SMPS Assembly into the rack frames designated for SMPS Assembly as shown in Figure 3-22: Inserting SMPS Assembly
Important

Attach the inserted SMPS Assemblies to the rack frames by fastening each with four M5 x
10Lscrews


Verify that the torque setting is correct.
5. Slide the SMPS Assembly into the rack frame on the shelf designated for the SMPS Assembly as shown below.
6. After all SMPS Assemblies are inserted into the rack frames, attach them to the rack frame with screws (Torque: 5.1–6.1 Nm
[50–60 kgf cm])
7. After all SMPS Assemblies are attached to the rack frames, connect the ground cables.
English 8/2020. Rev 0.3
(Torque: 5.1–6.1 Nm [50–60 kgf cm])

Figure 3-22: Inserting SMPS Assembly

Figure 3-23: Attaching the SMPS Assembly

.
3 Installing the Product
35