Appendix A Log Messages - Motorola SE-1010 Product Manual

Log messages are categorized by two levels of severity:
•
•
Table A-1 on page 28 shows the four categories of log messages:
•
•
•
•
The following bullets describe log message:
•
•
•
•
Document Number: 504834-001
Warnings are non critical faults.
Faults (shown in bold in Table A-1 on page 28) activate the Form_C circuit on the back
panel and light up the Fault LED on the front panel.
PP : Packet Processor
AP_1 : Audio Processor A
AP_2 : Audio Processor B
Miscellaneous : Video Input Sync-Loss and Video Input Sync
Each fault and/or warning results in a log message.
01 is the most recent log, 02 is the next log, and 99 is the oldest log.
If 99 log messages are recorded and another log message occurs, message 99 is deleted,
all other messages are incremented by 1, and the new message is added at location 01.
Each log message is recorded only once for each Digital Signal Processor (DSP):
Packet Processor, Audio Processor A, and Audio Processor B. However, when no faults
and warnings messages exist for a particular DSP, a log message may reoccure.
Log Messages
A
27