Motorola SE-1010 Product Manual page 2

Table of Contents

Advertisement

Documentation Notice
The information contained in this document is subject to change without notice and should not be construed as a
commitment by Motorola BCS.
Motorola BCS assumes no responsibility for any errors that may appear in this document nor does it make express or
implied warranty of any kind with regard to this material, including but not limited to, the implied warranties of
merchantability and fitness for a particular purpose. Motorola BCS shall not be liable for incidental or consequential
damages in connection with, or arising out of the provision, performance or use of this document and the program
material which it describes.
The software described in this document is furnished under a license and may be used or copied only in accordance
with the terms of such license. No responsibility is assumed for the use or reliability of software on equipment that is
not supplied by Motorola BCS or its affiliated companies.
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class A digital device, Pursuant to Part 15
of the FCC Rules. These limits are designed to provide a reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Any changes or modifications not expressly approved in writing by the manufacturer could void the user's authority to
operate the equipment.
Canadian Department of Communications compliance statement:
This equipment does not exceed Class A limits per radio noise emissions for digital apparatus set out in the Radio
Interference Regulation of the Canadian Department of Communications. Operation in a residential area may cause
unacceptable interference to radio and TV reception requiring the owner or operator to take whatever steps are
necessary to correct the interference.
Avis de conformite aux normes du ministere des Communications du Canada:
Cet equipment ne dépasse pas les limites de Classe A d'émission de bruits radioélectriques pour les appareils
numériques tels que prescrites par le Règlement sur le brouillage radioélectrique etabli par le ministére de
Communications du Canada. L'exploitation faite en milieu résidentiel peut entrainer le brouillage des réceptions radio
et télé, ce qui obligerait le propriétaire ou l'operateur à prendre les dispositions nécessaires pour en éliminer les
causes.
CISPR 22 (EN 55022) Compliance
This equipment has been tested and found to comply with the limits for Class A information technology equipment,
per C.I.S.P.R. Publication 22 (EN 55022). The class A limits may be too liberal for domestic establishments and some
residential areas. Shielded I/O cables must be used when operating this equipment.
Document Revision: A
Date: June 6, 2003
Document No.: 504834-001
Manufactured under license from Dolby Laboratories.
Covered under one or more of the following U.S. Patents: 5,216,503; 5,506,844; 6,167,084 and patents pending.
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or
service names are the property of their respective owners. Dolby is a trademark of Dolby Laboratories.
© Motorola 2003.
General Instrument Corporation doing business as the Broadband Communications Sector of Motorola, Inc.
6450 Sequence Drive
San Diego, CA 92121
(858) 455-1500
http://www.motorola.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Se-2000

Table of Contents