Status Log Menu; Clear Status Log - Motorola SE-1010 Product Manual

Status Log Menu

Use the encoder's Status Log menu to view messages. For more details, see "Log Messages"
on page 27.
To view the log message
1. Navigate to the SE-Status Log menu as shown below.
•
2. Press ENTER and use the right arrow button to go directly to a specific message number.
3. To return the cursor to the Menu Line (top line), press ENTER.

Clear Status Log

To clear all log messages, press the right arrow ( > ) button until the pointer is in front of
CLEAR as shown below and press ENTER twice.
•
Note: If no messages are recorded, the LCD displays: Status log is empty.
Resetting or power cycling the encoder does not clear log messages.
Document Number: 504834-001
> S E – 2 0 0 0
< > E R e c : 0 1
•
> S E – 2 0 0 0
< > E R e c : 0 1
S E – 2 0 0 0
< > E S t a t u s
S T A T U S L O G
V i d e o I n p u t S y n c
S T A T U S L O G
V i d e o I n p u t S y n c
S T A T U S L O G
l o g i s e m p t y .
C L E A R
L o s s
C L E A R
L o s s
> C L E A R
25