Table of Contents
Advertisement
VBI Options
To view the Vertical Blanking Interval (VBI) options, go to the Preset menu, press the right
arrow ( > ) button until the pointer is in front of the VBI, and press ENTER. Now use the up
and down arrow buttons to access each VBI option. To enable or disable an option, press the
left or right arrow button. When all options are set, press ENTER to return to the Menu Line
(top line).
Important: The options in this menu will vary depending on the current setting for video IN
(input) option. The video IN option is described at the top of Table 2 on page 13. If IN is set
to NTSC, PAL-M, or 525SDI, use Table 4 to view or change the options. If IN is set to PAL or
625SDI, use Table 5 to view or change the options.
•
Table 4
Option
Type:CC DTV
Type:CC DCII
Type:SID/AMOL1 1/20
Type:SID/AMOL1 2/22
Type:SID/AMOL2 1/20
Type:SID/AMOL2 1/22
Type:SID/AMOL2 2/20
Type:SID/AMOL2 2/22
Type:NABTS 1/10
through
Type:NABTS 1/22
Type:NABTS 2/10
through
Type:NABTS 2/22
Table 5
Option
Type:WST 1/07
through
Type:WST 1/22
Type:WST 2/07
through
Type:WST 2/22
16
P r e s e t
V i d e o
< > E
1
> T y p e : C C
VBI Options – When video input is set to NTSC, PAL-M, or 525SD I
Definition
ATSC Closed
Caption
DigiCipher II
Closed Caption
Source ID (SID)
Automated
Measurement of
Lineups (AMOL) 1
Source ID (SID)
Automated
Measurement of
Lineups (AMOL) 2
North American
Teletext Standard,
Field 1
North American
Teletext Standard,
Field 2
VBI Options – When video input is set to PAL or 625SD I
Definition
World Standard
Teletext
World Standard
Teletext
A u d i o 1
A u d i o 2
D T V
Description
Use this option to specify that the signal
contains closed caption information for
ATSC-compliant receivers.
Automatically enables Line 21, field one and
two (1 and 2). Field 1 is for Closed Caption
and field 2 is for V-chip. Use this option for
DigiCipher II applications.
Use this option for changing Neilson Ratings
information.
Use this option for changing enhanced
Neilson Ratings information.
Use this option to specify which lines (10
through 22) of field one (1) are enabled for
NABTS.
Use this option to specify which lines (10
through 22) of field two (2) are enabled for
NABTS.
Description
Use this option to specify which lines (07
through 22) of field one (1) are enabled for
WST.
Use this option to specify which lines (07
through 22) of field two (2) are enabled for
WST.
SE-1010 / SE-2000 Encoder Product Manual, Version 1.0
> V B I
D i s a b l e
Advertisement
Table of Contents
