Table of Contents
Advertisement
8
PROGRAMMING EXAMPLES
This chapter provides programming examples which control the inverter with sequence programs.
Item
Reading the inverter status
Setting the operation mode
Setting the operation commands
Setting the monitoring function
Reading a parameter value
Writing a parameter value
Setting the running frequency
(running speed)
Reading the fault records
Inverter reset
86
PROGRAMMING EXAMPLES
Reading the inverter status from the buffer memory of the master station
Selecting the Network operation mode
Commanding the forward rotation and middle speed signals
Monitoring the output frequency
Reading the value of Pr.7 Acceleration time
Setting "3.0 s" in Pr.7 Acceleration time
Setting to 50.00 Hz
Reading the inverter faults
Perform inverter reset at an inverter alarm occurrence.
Program example
Refer to page
91
92
93
94
95
96
97
99
100
Advertisement
Table of Contents
