Huawei APM30H Installation Manual page 35

10 Appendix
d
Repairing the Damaged Paint
1. Codes of color samples
Object
Cabinets (including APM30H, RFC,
TMC11H, IBBS200D and IBBS200T)
Base
2. Operation of description
Polishing
I In case the damaged area is stained or there th d
must be applied: Fine sand paper should be
to remove the stain or rust.
Cleaning
Clean cotton cloth can be used to rub the sta
polished or repaired.
Paint repair
Brushing paint of corresponding color should
Prior to the repair, the paint should be shaken
the bottle to absorb paint and evenly spread
is covered. Note that the paint coating applie
should not reveal any drops. The surface sho
Drying
The surface of the repair paint should be pla
that, subsequent operations can proceed.
Quality
The color of the surface of the repair area sh
area, without obvious edges and bulge. Scra ith t b i
properly. There should not be dropped paint.
Color N
RAL70
3010 lig
d i t i d th
d d b l S
Name Huawei Color
Code
35 YB026
ght grey YB030
e is rust on the materials, the following step i t th t i l th f ll
applied to polish the damaged area in order
in or dust on the surface of the area to be
be applied according to the original coating.
n well. After that, use the small brush inside
on the damaged area till the scratch/damage
d should be as thin as possible. Paint coating
ould be kept smooth.
ced in indoor temperature for 30 minutes. After
hould be consistent with that of the surrounding
atches and damages should be covered t h d d
.
3 4
International
Color Code
RAL7035
Pontone 422U
i t
h ld b d