Huawei APM30H Installation Manual page 21

5 Installing the Cables
c
Installing the Power Cables (A
3. APM30H - IBBS200D/IBBS200T
APM30H:IBBS=1:2
4. Power cables for the TEC in the IBBS200T
If the LOAD2 is already
occupied, it is recommended
that the fuse for the LOAD4
terminals be changed to meet
the output MCB requirements
for the IBBS. For details, see
"Appendix c" on page 33 Appendix c on page 33.
APM30H:IBBS=1:1
1. Power cables for the IBBS200D/
IBBS200T
Either the IBBS200D or the IBBS200T Either the IBBS200D or the IBBS200T
is installed.
Add the power series 120 connector.
For details, see "Appendix a" on page 31.
AC Power Supply Scenario)
FAN/TEC FAN/TEC C
RTN(+) NEG(-)
From LOAD2
2 0
BAT BAT
RTN(+) NEG(-)
Power series 120
connector
LOAD2
LOAD3
From LOAD3