Huawei APM30H Installation Manual page 30

Hide thumbs Also See for APM30H:
Table of Contents

Advertisement

8 Checklist for the Installat
c
Checklist for the Electrical Co
5
The exposed wires at the wiring terminals a
insulating tape or heat-shrinkable tube.
6
The flat washers and spring washers are w
7
The exterior of the battery is intact without
8
The shell of the battery is clean without any
9
The wiring post on the battery stands prop
covered with any acid substances.
10
The pressure relief valve of the battery is n
11
The power cables for the batteries are con
correctly.
12
12
The voltage of the battery is normal.
Th
lt
f th b tt
The voltage of a 2 V battery cell ranges fro
The voltage of a 12 V battery cell ranges fr
The total voltage of the batteries ranges fro
13
The fans work properly.
The fan in the IBBS200D rotates in a low s
The outer air circulation fan in the IBBS200
temperature of lower than 30°C), and the
The outer air circulation fan in the APM30H
temperature of lower than 35°C), and the
d
Checklist for the Cable Installa
1
The connectors of each cable are securely
the cabinet.
2
All cables are neatly bound with cable ties,
tightness, and in the same direction.
3
The power cable and PGND cable are route
4
The cables are distributed in a way to facilit
5
Both ends of each cable are legible. That is
6
Extra cable ties are stripped off. All cuts are
7
The idle port that no cable is connected to i
8
According to the APM30H capacity, ensure
MCBs for the batteries are set to ON. When
voltage, the batteries can provide backup p
tion
onnections
and the lug handles are insulated by the
well mounted to all wiring terminals.
y
y
y leakage trace.
y
erly without any damage, and the post is not
not transformed, and no liquid leaks.
nected to the positive and negative polarities
i
l
om 1.8 V to 2.35 V.
rom 10.8 V to 14.1 V.
om 43.2 V to 56.4 V.
speed in a normal situation.
0T stops in a normal situation (with the ambient
H stops in a normal situation (with the ambient
ation
connected, especially those at the bottom of
and arranged at even intervals, to proper
ed separately from other cables.
tate maintenance and capacity expansion.
s, both ends of the cable are labeled.
e smooth without sharp projections.
s properly protected.
n the mains works without voltage or with under
power for the APM30H.
2
9
any scratch, dent, or crack.
g
inner air circulation fan rotates in a high speed.
inner air circulation fan rotates in a low speed.
that all the MCBs are in normal status and the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tmc11hIbbs2000dIbbs200t

Table of Contents