Huawei APM30H Installation Manual page 29

8 Checklist for the Installat
a
Checklist for the Cabinet Insta
1 The installation position of the cabinet str
When the cabinet is mounted on a wall, t
2
the bolt holes. The mounting ears are pla
When the cabinet is mounted on a metal
3
When the APM30 is installed on the floor, When the APM30 is installed on the floor
4 4
The horizontal error of the cabinet is less
5
than 3 mm.
6 All the bolts are tightened, especially for e
spring washers are completely and prope
7 7 The cabinet is neat and clean. The cabinet is neat and clean
8 The paint on the surface of the cabinet is
9 The space reserved for the user devices
10 The cabinet door and the lock are functio
11 All the labels are complete, correct, and l
b
Checklist for the Field Cleanlin
1 There are no fingerprints or other smears o
2 There are no unnecessary adhesive tapes
3 3 There are no adhesive tapes cable ties w There are no adhesive tapes, cable ties, w
All the stuff around the cabinet is neat, clea
4
c
Checklist for the Electrical Co
1 All self-made PGND cables are copper-ba
breaking device such as the switch and fus breaking device such as the switch and fus
grounding system, and no short circuit is a
2 According to wiring diagram of the power s
securely connected, whether the AC lead-i
connected, and whether the screws are tig
output and input cables.
3 The redundant part of the power cable or P
4 The lugs at both ends of the power cable o
crimped.
tion
allation
rictly comply with the engineering design.
he holes of the mounting ears are aligned with
aced against the wall securely.
pole, the pole fixtures are secure and reliable.
, the base is securely installed. the base is securely installed
than 3 mm and the vertical error is not greater
electrical connections. The flat washers and
erly installed.
satisfactory.
is covered by a filler panel.
onal. The gag lever post is tightened.
egible.
ness
on the surface of the cabinet.
or cable ties on the cables.
wastepaper or packing bags around the cabinet wastepaper, or packing bags around the cabinet.
an, and intact.
onnections
sed and have proper wire diameters. No
se is allowed for the electrical connection of the se is allowed for the electrical connection of the
allowed.
system, check whether the PGND cables are
in cables and internal cables are properly
ghtened. Ensure that no short circuit occurs in
PGND cable is stripped off rather than coiled.
or the PGND cable are securely soldered or
2 8