INSTRUCTION MANUAL 10DX3111A&G Sizes 14 - 24 Inches
7.0 PARTS LIST
7.1 Basic Meter Parts
The Basic Meter Parts List is cross referenced by symbol number to Figure 7-1 below. Separate figures and
parts lists are provided for the electronics housing and for the electrode assemblies.
SEE NOTE 4
FIGURE 7-1. BASIC FLOWMETER CONSTRUCTION
NOTES:
1. The meter body is not a field repairable item. In the event of failure of the meter's internal components, such
as magnet coils or electrode wiring, the flowmeter must be returned to ABB Automation for repair. All correspon-
dence should reference the complete meter model number and serial number.
2. Refer to the Instruction Bulletin supplied with the Signal Converter for the applicable replacement part
number. ABB Automation maintains a repair/exchange program for this assembly; simply add "RE" to the part
number given in the IB Parts List. For example:
Model 50XM1000N = PN CD674A498U50RE
3. Mounting gaskets and hardware must be selected according to meter size.
4. Meter body wiring is shown without the electronics housing weldment for clarity. Electronics Housing parts
are shown in Figure 7-2.
EYEBOLT:
14, 16 & 18 in. - 124D041U02
20 & 24 in. -
124D041U03
7-1