Table of Contents
Advertisement
Chapter 7. Hardware removal, installation and conversion
See this section for hardware replacement and conversion.
Removing and installing the side panels
Follow the instructions in this section to remove and install the side panels.
Remove the side panels
Complete the following steps to remove the side panels.
Step 1.
Acquire the key that comes with the cabinet.
Step 2.
Insert the key that comes with the rack cabinet into the key hole on the side panel, and turn it
counterclockwise to unlock the panel.
Figure 47. Removing the side panel
Step 3.
Press on the latch on both sides of the panel at the same time to release the side panel.
Step 4.
Pivot the top of the panel away from the cabinet frame to remove it.
Install the side panels
Complete the following steps to install the side panels.
Step 1.
Align the bottom of the panel to the slot on the bottom of the cabinet frame, and pivot the top of the
panel towards the cabinet frame.
© Copyright Lenovo 2020
41
Advertisement
Table of Contents
