Lenovo ThinkSystem Micro DataCenter 6U 1200mm Deep Rack Cabinet User Manual page 36

• Two units: 3U and 4U
• Three units: 3U, 4U, and 5U
• Four units: 3U, 4U, 5U, and 6U
The cabinet supports up to four units of SR250 and corresponding rail kit. For optimal use of space, it is
advised to determine the location to install the rail kits based on the number of units that are installed.
• One unit: 3U
• Two units: 3U and 4U
• Three units: 3U, 4U, and 5U
• Four units: 3U, 4U, 5U, and 6U
Note: When installed vertically into this cabinet, the server can be installed with server top facing either right
or left. In this section, however, it is illustrated with the top of server facing left as an example.
P P r r o o c c e e d d u u r r e e
Step 1. Remove the inner rails.
Figure 27. Removing the inner rails
① Pull the inner rail outward until the release latch becomes visible.
② Press on the release latch.
③ Remove the inner rail from the outer rail.
Step 2. Install the inner rails to the server.
26
ThinkSystem Micro DataCenter 6U 1200mm Deep Rack Cabinet User Guide