Table of Contents
Advertisement
Figure 39. Installing the upper C-channel
① Have one person hold and align the C-channel between the upper rack EIA flanges.
② Secure the front end of the C-channel to the front EIA flange with one M5 x 20 mm screw
through the left most hole in the channel.
③ Secure the rear end of the C-channel to the rear EIA flange with two M5 x 20 mm screws
through the right and left most holes in the bracket.
Do NOT over-tighten the screws as the rack EIA flange could be deformed.
Step 5.
Rotate the server 90 degree clockwise so that the right side is facing down.
34
ThinkSystem Micro DataCenter 6U 1200mm Deep Rack Cabinet User Guide
Advertisement
Table of Contents
