Table of Contents
Advertisement
Figure 45. Securing the power distribution unit
① Align the bracket to the 1U on the rear side of the rack.
② Secure the two ends of the bracket to the top and bottom rack with two pairs of screws.
Installing switches
See this section to learn how to install switches into ThinkSystem Micro DataCenter 6U 800mm Deep Rack
Cabinet.
This rack cabinet supports the following switches. See the corresponding links for installation instructions.
•
https://systemx.lenovofiles.com/help/topic/com.lenovo.thinksystem.ne0152t.doc/ts_ne0152t.html
•
https://systemx.lenovofiles.com/help/topic/com.lenovo.thinksystem.ne1032t.doc/ts_ne1032t.html
•
https://systemx.lenovofiles.com/help/topic/com.lenovo.thinksystem.ne2572.doc/ts_ne2572.html
•
https://systemx.lenovofiles.com/help/topic/com.lenovo.rackswitch.ce0152pb.doc/rs_ce0152pb.html
.
Chapter 6
Installing optional kits
39
Advertisement
Table of Contents
