ABB REC670 Product Manual page 84

Bay control REC670
Pre-configured
Product version: 1.1
Interface converter (for remote end data communication)
External interface converter from C37.94 to G703 including
1U 19" rack mounting accessories
External interface converter from C37.94 to G703.E1
Test switch
The test system COMBITEST intended for use
with the IED 670 products is described in
1MRK 512 001-BEN and 1MRK 001024-CA.
Please refer to the website: www.abb.com/
substationautomation and ABB Product
Guide > High Voltage Products > Protection
and Control > Modular Relay > Test
Equipment for detailed information. When FT
switches are considered, please refer to the
website:
www.abb.com>ProductGuide>Medium
Voltage Products>Protection and Control
(Distribution) for detailed information.
Due to the high flexibility of our product and
the wide variety of applications possible the
test switches needs to be selected for each
specific application.
Select your suitable test switch base on the
available contacts arrangements shown in the
reference documentation.
However our proposal for suitable variants are;
Single breaker/Single or Three Phase trip
with internal neutral on current circuits
(ordering number RK926 315-AK).
Protection cover
Protective cover for rear side of RHGS6, 6U, 1/4 x 19"
Protective cover for rear side of IED, 6U, 1/2 x 19"
Protective cover for rear side of IED, 6U, 3/4 x 19"
Protective cover for rear side of IED, 6U, 1/1 x 19"
84
1MRK 511 192-BEN B
Quantity:
Quantity:
Single breaker/Single or Three Phase trip
with external neutral on current circuits
(ordering number RK926 315-AC).
Multi-breaker/Single or Three Phase trip with
internal neutral on current circuits (ordering
number RK926 315-BE).
Multi-breaker/Single or Three Phase trip with
external neutral on current circuit (ordering
number RK926 315-BV).
The normally open "In test mode" contact
29-30 on the RTXP test switches should be
connected to the input of the test function
block to allow activation of functions
individually during testing.
Test switches type RTXP 24 are ordered
separately. Please refer to Section
documents" for reference to corresponding
documents.
RHGS 6 Case or RHGS 12 Case with mounted
RTXP 24 and the on/off switch for dc-supply
are ordered separately. Please refer to Section
"Related documents"for reference to
corresponding documents.
Quantity:
Quantity:
Quantity:
Quantity:
Issued: June 2010
1MRK 002 245-AA
1MRK 002 245-BA
"Related
1MRK 002 420-AE
1MRK 002 420-AC
1MRK 002 420-AB
1MRK 002 420-AA
ABB