Restore Configuration File Pop Up Screen - Motorola PTP 300 series User Manual

Web Page Reference
8.3.1.7 Restore Configuration File
The configuration file can also be used when swapping out a faulty wireless unit. If one of the
wireless units is replaced on a wireless link a configuration file captured from the faulty unit can
be uploaded into the new unit to speed up replacement. It should be noted that when placing
a configuration file into a wireless unit with a different MAC Address the license key will not be
restored and may need to be entered. This can be obtained either from the Quick Start Guide
supplied with the replacement wireless unit or directly from Motorola. Note that the target MAC
address at the other end needs to be changed to ensure that it is using the MAC address of the
replaced unit.
The restoration of configuration files can be performed using the Restore configuration tool. Using
the browser button to locate the configuration file you wish to restore then click the 'Restore
Configuration File and Reboot' button (Figure 39). The user will then be prompted to confirm
the action (Figure 40)
Figure 39 Restore Configuration File Pop Up Screen
77