Vlan Configuration Fields - Motorola PTP 300 series User Manual

Use VLAN For Management Interfaces:This control can be configured with one of the fol-
lowing three values:
No VLAN Tagging
IEEE 802.1Q Tagged (C-Tag, Type 8100)
IEEE 802.1ad Tagged (S-Tag or B-Tag, Type 88a8)
VLAN Management VID: This 802.1Q or 802.1ad VLAN ID (VID) will be included in packets
generated by the management interfaces. Valid settings are in the range 0 to 4094.
VLAN Management Priority: This 802.1Q or 802.1ad VLAN Priority will be included in
packets generated by the management interfaces. Valid settings are in the range 0 to 7.
VLAN Management VID Validation: If enabled, the management interfaces will only respond
to Ethernet packets tagged with the configured Management VID; otherwise packets with any VID
will be accepted.
8.3.1.4 QoS Configuration Page
The QoS configuration page
fication of priority encoded Ethernet frames into up to eight traffic classes.
Web Page Reference
Figure 34 VLAN Configuration Fields
35) allows the system administrator to configure the classi-
(Figure
72