Detailed Installation; Diagrammatically Showing Typical Mast And Wall Installations - Motorola PTP 300 series User Manual

Hide thumbs Also See for PTP 300 series:
Table of Contents

Advertisement

11.2 Detailed Installation

The recommended components for an installation protected for nearby strikes are:
Recommended cables as described in
Lightning protection: Motorola PTP-LPU - 2 per link (2 Motorola Kits, part number 2978)
Grounding Stake
RJ45 screened connectors
NOTE: There may be a local regulatory requirement to cross bond the CAT 5e cable at regular
intervals to the mast. This may be as frequent as every 10 meters (33 feet).
Figure 94
includes illustrations showing the placement of the PTP lightning protection units and
the recommended components for typical Mast/Tower or Wall installations.
Figure 94 Diagrammatically Showing Typical Mast and Wall Installations
The Lightning protection Unit should be mounted at the building entry point and must be
grounded.
Figure 94
includes illustrations showing the placement of the PTP lightning protection units and
the recommended components for typical Mast/Tower or Wall installations.
Lightning Protection
Section
3.3.5.
130

Advertisement

Table of Contents
loading

Table of Contents