Sound Pressure Level; Sound Power Level; Vibration Level - Toro 38066 Operator's Manual

Hide thumbs Also See for 38066:
Table of Contents

Advertisement

Do not use the snowthrower on a roof.
Do not touch the engine while it is running or soon after
it has stopped because the engine may be hot enough to
cause a burn. Do not add oil or check the oil level in the
crankcase while the engine is running.
Perform only those maintenance instructions described
in this manual. Before performing any maintenance,
service, or adjustment, stop the engine, remove the key
and disconnect the wire from the spark plug. Keeping
the wire away from the spark plug to prevent someone
from accidentally starting the engine. If major repairs
are ever needed, contact your Authorized Service
Dealer.
Do not change the governor settings on the engine.
When storing the snowthrower for more than 30 days,
drain the fuel from the fuel tank to prevent a potential
hazard. Store fuel in an approved fuel container.
Remove the key from the ignition switch before storing
the snowthrower.
To ensure the best performance and safety, purchase
only genuine Toro replacement parts and accessories.

Sound Pressure Level

This unit has a sound pressure at the operator's ear of
93 dB(A), based on measurements of identical machines
per Directive 84/538/EEC.

Sound Power Level

This unit has a sound power level of 105 LwA, based on
measurements of identical machines per Directive
84/538/EEC.

Vibration Level

This unit has a maximum hand-arm vibration level of
15.8 m/s , based on measurements of identical machines
per EN 1033.
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

824 xl power throw

Table of Contents