Table of Contents
Advertisement
Using the Fuel Shutoff Valve
The machine has 2 fuel tanks, one on the left side and the
other on the right side. Each tank connects to a check valve
and then to a tee. From there a common fuel line leads to
the engine (Fig. 9).
1
Figure 9
1. Fuel shutoff valve
Close the fuel shutoff valve before transporting or storing
the machine.
Operating the Parking Brake
Always set the parking brake when you stop the machine or
leave it unattended.
Important
Do not park the machine on slopes unless
the wheels are chocked or blocked.
Setting the Parking Brake
1. Move the motion control levers (Fig. 10) to the neutral
lock position.
1
2
Figure 10
1. Parking brake—On
m–7702
m–4121
2. Parking brake—Off
17
2. Pull back and up on the parking brake lever to set the
parking brake (Fig. 10).
Note: The parking brake lever should stay firmly in the
Engaged position.
Releasing the Parking Brake
Push forward and down on the parking brake lever to
release the parking brake (Fig. 10).
Starting and Stopping the
Engine
Starting the Engine
1. Sit on the seat and move the motion controls to the
neutral locked position.
2. Set the parking brake; refer to Setting the Parking Brake
on page 17.
3. Move the PTO (power takeoff) to Off (Fig. 11).
2
1
m–4201
Figure 11
1. PTO—On
2. PTO—Off
4. Move the choke control to On before starting a cold
engine (Fig. 12).
Note: A warm or hot engine may require choking. After
the engine starts, move the choke control to the Off
position.
2
1
m–2719
Figure 12
1. Choke—On
2. Choke—Off
Advertisement
Table of Contents
