Setting The Machine To Match Turf Conditions - Toro 04034 Operator's Manual

Setting the Machine to Match
Turf Conditions
Use the following table to set the machine to match
turf conditions.
Bed bars: Standard and Optional
Part Number
112-9281-01 Standard
112-9279-03 Aggressive
112-9280-01
Standard
110-9278-03 Aggressive
Bed knives: Standard and Optional
Part Number
93-4262 Microcut
93-4263 Tournament
93-4264 Low Cut
112-9275 Microcut
94-5885 Tournament
104-2646 High Cut
93-9015 Low Cut
Rollers: Standard and Optional
Part Number Description
99-6241 Narrow Wiehle
88-6790 Wide Wiehle
104-2642 Full Roller
71-1550 Wiehle Roller
93-9045 Wiehle Roller
52-3590
Swaged Roller
93-9039 Narrow Wiehle
95-0930 Full Roller
Clip Kit
Part Number Description
65–9000
Clip Kit
Greensmower Cutting Unit Set-up Matrix
Description Mower
Greensmaster 1000
Greensmaster 1000
Greensmaster 1600
Greensmaster 1600
Description Mower
Greensmaster 1000
Greensmaster 1000
Greensmaster 1000
Greensmaster 1600
Greensmaster 1600
Greensmaster 1600
Greensmaster 1600
Mower
Greensmaster 1000
Greensmaster 1000
Greensmaster 1000
Greensmaster 1000
Greensmaster 1000
Greensmaster 1000
Greensmaster 1600
Greensmaster 1600
Mower
Greensmaster 1000
& Greensmaster
Aggressiveness
Height of Cut Range
<0.125 inches
0.125 -0.25 inches
0.25 inches and up
<0.125 inches
0.125 -0.25 inches
0.25 inches and up
0.25 inches and up
Diameter/Material
2.0 inches Aluminum
2.0 inches Aluminum
2.0" Steel
2.0 inches Cast Iron
2.5 inches Aluminum
2.5 inches Aluminum
2.5 inches Aluminum
2.5 inches Steel
1600
31
Less Standard Greensmaster 1000
More
Less
Standard Greensmaster 1600
More
Standard
Tees
Standard Greensmaster 1600
Comments
Standard, 0.2 Spacing
More Penetration, 0.43
Spacing
Least Penetration
More Penetration, 0.43
Spacing
24 inches Wide for Edge
Support
Standard
Least Penetration
Comments
Decrease clip to 0.25"
Comments
Comments