Deck Rollers And Skids - Toro Groundsmaster 4100-D Service Manual

Deck Rollers and Skids

9
10
8
7
6
RIGHT
FRONT
1. Roller
2. Flange head screw
3. Roller shaft
4. Flange nut
Removal
1. Remove skids and rollers from deck using Figure 20
as a guide.
Installation
1. Install skids to deck using Figure 20 as a guide. Make
sure to install skids in the same mounting hole height
position (lower or upper).
2. When installing roller (item 6), install cap screw with
the threads orientated toward the centerline of the deck.
Install and tighten lock nut until roller will not rotate, then
loosen lock nut only enough to allow roller to rotate free-
ly. Make sure to install all deck rollers in the same mount-
ing hole height position (lower or upper).
Groundsmaster 4100−D
5
4
3
Figure 20
5. Lock nut
6. Roller
7. Cap screw
Page 8 − 19
7
6
2
1
8.
9.
10. Flange head screw
5
5
7
6
Flange nut
Skid (RH shown)
Cutting Deck