Epson Stylus Color 1520 User Manual page 99

Using Your Printer with DOS
3. Hold down the
button to turn on the printer and enter
Operate
P
default-setting mode. Release the
when the
Operate
The printer loads a sheet of paper and prints an instruction
sheet telling you how to select a language (the default
setting is English). The printer can then print
default-setting instructions in the language you choose.
4. Press the button until the
Alt
lights on your control panel indicate the language you want
to use.
English Both lights off
French
Ink Out
Spanish Both lights on
Portuguese
Ink Out
German
Ink Out
Italian
Ink Out
5. Press the
Pause
changing the default settings.
6. Follow the instructions on the sheets to change the
necessary settings, as listed in the next section. Your
changes remain in effect until you change them again.
(To exit without changing any settings, press the
button.)
7. When you're finished changing settings, press
if you need to eject any loaded paper. Then turn off the
printer to exit default-setting mode.
8. Wait five seconds, then turn on your printer to resume
printing normally.
5-4
D button and press the
Micro Adjust
Micro Adjust
light comes on.
Ink Out
B on and
Ink Out
B flashing and
B flashing and
B off and
Ink Out
button. The printer prints instructions on
D button
B and
Ink Out A
A off
A on
Ink Out
A off
Ink Out
A on
Pause
Load/Eject