Epson Stylus Color 1520 User Manual page 60

4. Make sure the thickness lever is in the 0 position; see
page 3-11 for instructions.
5. Remove the manual feeder from the top of the printer by
pulling it straight back. Then set it aside.
6. Install the cable cover by inserting the three posts on the
cover into the three holes on the back of the printer. Press
the cover down until it locks in place.
To hold the printer cables away from your paper supply,
loop them into the hooks underneath the cable cover.
7. Pull up the sprocket-lock levers to unlock them so you can
slide the sprockets into position.
8. Slide the left sprocket all the way right until it stops. Press
down the sprocket-lock lever to lock it in place.
3-15
Printing on Special Media
center support
sprocket-lock levers