Note:
The roll paper cut-off
position you set remains
in effect until you
change it again, even
when you turn off the
printer.
Warning:
Keep your hands away from
the knife so you don't cut
yourself.
Press
Micro Adjust
necessary to move the end of the banner to the cut-off
position on the banner paper cutting guide.
cut-off position
3. Hold down the cutting guide. Then, using a sharp knife,
cut straight across the paper, pressing the knife against the
inside edge of the cutting guide and on top of the metal
strip on the output tray.
4. Remove the printed paper and raise the cutting guide to its
upright position.
3-31
Printing on Special Media
D and
Micro Adjust
U buttons as