Epson Stylus Color 1520 User Manual page 70

Caution:
Adjust the banner paper
holders so they fit the roll
paper snugly, but not so
tightly that the roll can't
rotate. If they're too tight,
the paper won't feed into
the printer.
7. Clip the banner paper cutting guide onto the output tray
posts.
8. Slide the left banner paper holder all the way to the left and
slide the right banner paper holder approximately 1/8-inch
(3 mm) from the far right edge.
9. Position the roll paper so it feeds into the printer as shown
below, with the printable side face up. Then place it onto
the right banner paper holder and slide the left holder over
to support the roll. Align the roll paper's edges with the
edge guides on the holders.
3-25
Printing on Special Media
set to about 1/8-inch (3 mm)
from the far right position