Epson Stylus Color 1520 User Manual page 141

The margins are incorrect.
Possible cause
Margins are set incorrectly
in your software
application.
Paper settings in the printer
software are incorrect for
your paper size.
The edge guides or
sprockets are set
incorrectly.
The image is inverted as if viewed in a mirror.
Possible cause
You used a Flip Horizontal
option in your application
software or the printer
software.
The printer prints blank pages.
Possible cause
The print head nozzles are
clogged.
Paper settings in the printer
software are incorrect for
your paper size.
Your printer is not the
Windows default printer.
Your printer is not selected
in the Macintosh Chooser.
Solution
Check your software documentation for instructions on selecting
the correct margins for your paper size. The maximum printable
width is 13.6 inches (345 mm) on any size paper.
Make sure the margins are within the printable area of the page.
See Appendix C for more information.
Select the correct paper settings for your paper size. See
Chapters 1 and 2 for more information.
The edge guides or sprockets in the paper feeder are set
incorrectly for your paper's width. See the instructions in
Chapter 3. You may also need to adjust the margins in your
software application to match the new loading position.
Solution
Turn off the Flip Horizontal or mirror setting in your application
software or the printer software. See Chapter 2 for information.
Remember that images printed on iron-on transfer paper and back
light film should be inverted so they appear correctly when
transferred or viewed from the reverse side.
Solution
Clean the print heads following the instructions in Chapter 6.
Select the correct paper settings for your paper size. See
Chapters 1 and 2 for more information.
Select your printer as the default Windows printer. See your
Windows documentation or online help for instructions.
Open the Chooser and select your printer. See the Quick Setup
booklet for instructions.
7-17
Troubleshooting