Table of Contents
Advertisement
DOK-SUPPL*-VPB*40.1***-PR02-EN-P
Rexroth IndraControl VPB 40.1 Control Cabinet PC
Fig.9-10:
UPDD setup programs for the touch screen
A dialog for different settings is displayed:
Fig.9-11:
Dialog for touch screen settings
For further information, click on the Help button on the corresponding tab.
Using Start ▶ Programs ▶ UPDD (see
on page
68) further programs, e.g. Test or Calibrate can be called, if necessary.
The program Calibrate might be of special interest. If required, the touch mouse
can be calibrated with the help of this program. For this, touch, one after the
other, the middle of the four crosses displayed on the screen.
The online help provides further information on these programs. The online help
can be started with the "GENER-EN.CHM" file, which is also filed in the D:
\Programs\UPDD\ folder.
Bosch Rexroth AG
chapter 9.2 "Touch Screen Software"
69/81
Software
Advertisement
Table of Contents
