Table of Contents
Advertisement
62/81
Bosch Rexroth AG
Software
Configuration
①
Service has been started, but is not ready for operation yet
②
Service is in operation
③
Service is in operation, however errors have been indicated during the
start (battery, temperature, fan and voltage errors)
Fig.9-2:
Indication of the operating status of the service in the Windows task bar
In the service manager of Windows the status of the UPS NT service is indi‐
cated:
●
UPS NT stopped: No entry in the status column
●
UPS NT started: Entry Started is displayed as status
Click on the Start or Stop buttons to start or stop the marked entry UPS NT
Service.
Fig.9-3:
Services window
To configure the UPS NT program, select UPS NT Control in the control panel,
see
fig. 9-4 "Symbol UPS NT Control in the Windows Control Panel" on page
63.
NOTICE
The UPS NT program always runs as a Windows NT service. Changing the
user does not influence this behavior. The user cannot terminate the program
or stop the monitoring without administrator rights.
DOK-SUPPL*-VPB*40.1***-PR02-EN-P
Rexroth IndraControl VPB 40.1 Control Cabinet PC
Closing the program or stopping the monitoring
is not possible due to missing administrator
rights.
Advertisement
Table of Contents
