Table of Contents
Advertisement
DOK-SUPPL*-VPB*40.1***-PR02-EN-P
Rexroth IndraControl VPB 40.1 Control Cabinet PC
7.2.8
VGA Interface XVGA
XVGA – Connection external mon‐
NOTICE
Please note that the network card of the outstation has to be able to process
the same data transmission rate.
An external monitor can be connected to the VGA connection (XVGA).
itor
●
Video RAM: max. 8 MB
NOTICE
Please observe that the external monitor has to be already connected during
the booting process of the VPB 40.1, as otherwise the VGA interface is not
initialized by the BIOS.
NOTICE
Before plugging-in a graphics card, the video adapter integrated in BIOS is to
be switched off.
HD female connector, 15-pin
Cable length:
Cable type:
Max. resolution:
Fig.7-13:
VGA inerface - XVGA
Fig.7-14:
XVGA interface
Bosch Rexroth AG
No or incorrect network data transmission if the
data rate is set manually!
No display of BIOS messages on the external
monitor if the monitor has been connected first
after switching on the VPB 40.1.
No screen output via an additional graphics
card if the internal graphics adapter is not
switched off.
1.5 m max.
Shielded, cross-section min. 0.14 mm
1600 x 1200 pixels, 4294 mill. colors max.
37/81
Connections
2
Advertisement
Table of Contents
