GE MobileLink CB-1000 Installation And Troubleshooting Manual page 17

Installing Client Bridge on an Original Style Trolley
Revision D
Installation Procedures
1. Be sure that all the information which was entered during client
bridge configuration has been accurately recorded on the Service
Label shown below.
2. Apply the Service Label to the bottom of the bracket which will be
used to assemble the client bridge to the original trolley. (This is the
bracket which does not have the client bridge mounted.)
Client bridge is mounted
to bracket to be used
with new style trolley.
MobileLink
2002783-060
MAC5K001
3001
192.168.0.5
255.255.255.0
none
WLAN
Service Label
Original style bracket
to be used with an
original style trolley.
Client Bridge Kit
13A
36A
13